More engine room?

[Jcdata]

I realized the type 65 has a 5-inch longer wheelbase so with that said, does the engine compartment have more room?

I'd like to put a dry sump system on my engine.

[John Dol]

Think they did that on the Lagano coupe, so should be good!

HTH

John

[Chris @ Forma]

Much more room than the roadster. Our has a Coyote with two EFR turbos packaged in front of the engine behind the front cross braces. I don't remember the dimensions but I'll measure tomorrow and give you some measurements.

Chris @ Forma

[David Williamson]

The hood height is lower than the Roadster so if you are going with Ford small block the air cleaner space is tight especially with a 351 based engine. Otherwise lots of space.
David W

[Jcdata]

Thanks guys!


Chris,

I look forward to your information. Do you have a coupe or a coupe r?

[GoDadGo]

If you need more room, consider stuffing in an LS.

Here's an inexpensive option to look at:

https://paceperformance.com/i-231575...ngine-376cid-5

Move the engine forward and you'll have plenty of room for a T56.

Good Luck & Happy Wrenching!

[Jcdata]

Godadgo,

Aluminum block, billet crank and rods, pistons, steel billet cam core...are in house.

I don't want to do what the trend is however..

[GoDadGo]

Godadgo,

Aluminum block, billet crank and rods, pistons, steel billet cam core...are in house.

I don't want to do what the trend is however..

Sorry but I didn't realize that you had your engine already.

Also, I totally understand NOT wanting to do what the trend is and I think I'm the only guy with a 383 SBC/Dart, ZF 6-Speed and a 3-Link Dana 44 out back.
For the record, I really want to build a Type-65 down the road, but I haven't got the budget nor the skills to tackle a Daytona at this time.

Good Luck From The Dark Dart Side!

[Jeff Kleiner]

...
For the record, I really want to do a Type-65 down the road, but I haven't got the budget nor the skills to tackle a Daytona at this time.

Can’t speak for your budget but as for the skills if you can build a roadster you can build a Coupe.

Jeff

[Jcdata]

Sorry but I didn't realize that you had your engine already.

Also, I totally understand NOT wanting to do what the trend is and I think I'm the only guy with a 383 SBC/Dart, ZF 6-Speed and a 3-Link Dana 44 out back.
For the record, I really want to build a Type-65 down the road, but I haven't got the budget nor the skills to tackle a Daytona at this time.

Good Luck From The Dark Dart Side!

I appreciate that Steve.

[GoDadGo]

Can’t speak for your budget but as for the skills if you can build a roadster you can build a Coupe.

Jeff

Thanks for the vote of confidence Sir Jeffski.

[rczap]

Has anyone put a V10 from a Viper? I have done searches and nothing comes up.
Thanks

[Jcdata]

Waiting for the cylinder heads and billet steel 54 mm camshaft core.. it will more likely be a 5 stage dry sump system.

facebook_1573319214545.jpg

IMG_2626.jpg

Ross Pistons, total seal rings, Oliver Billet rods, King bearings..

oh yeah! Here are the valve covers I got custom fabricated.

20190312_170146.jpg

Will the new home be in a Coupe or Roadster?