-
Senior Member
Control arm welds
Moving this from my build thread. Anyone else have issues with the weld quality on their parts? The control arms were clearly not welded by the same guy (or gal) that welded my chassis. Not only was there very little penetration on one arm, he or she missed the entire seam on the other arm. I plan to inspect all of the welds now and wanted others to realize they may want to do the same. If powder coated it may not be so obvious.control arm 1 resized.jpgcontrol arm 2 resized.jpg
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Originally Posted by
ztoolman44
Moving this from my build thread. Anyone else have issues with the weld quality on their parts? The control arms were clearly not welded by the same guy (or gal) that welded my chassis. Not only was there very little penetration on one arm, he or she missed the entire seam on the other arm. I plan to inspect all of the welds now and wanted others to realize they may want to do the same. If powder coated it may not be so obvious.
control arm 1 resized.jpgcontrol arm 2 resized.jpg
Looks like some QA is needed Thats crazy
-
Seasoned Citizen
Dart Little M 406" SBC 800 HP N/A & 1,100 HP on nitrous, 2-spd Powerglide with trans brake, 6,000 RPM stall converter, narrowed Moser 88 3.90:1 spool with 35-spline gun-drilled axles & Torino bearings, custom parallel four-link, custom tube chassis & roll cage NHRA certified for 8.5-sec (only two FFR Hot Rods have this cert).
33 Hot Rod Super Pro Drag Racer Build:
33 HR NHRA Cert Roll Cage Build
-
Installed mine today, they looked fine; will reinspect closely tomorrow. (Received my kit about six weeks ago)
Which mounting holes are you using for lower control arms?
-
Senior Member
Originally Posted by
VIRGIN MIKE
Installed mine today, they looked fine; will reinspect closely tomorrow. (Received my kit about six weeks ago)
Which mounting holes are you using for lower control arms?
Haven't got there yet. Just laying stuff out, cleaning and inspecting.
-
Tool Baron
I think I would have contacted Factory Five before I posted a picture on the forum............ But that's just me.
Frank
__________________________
Factory Five Racing MKIII Super Snake Replica. Cannonball Cobra Drop Trunk Box, Horn Button and other machined Do Dads.
i.e.427 Chromed Full Width Roll Bar with integrated LED Third Brake Light.
I will never forget My Buddy Paul.
-
Post Thanks / Like - 0 Thanks, 2 Likes
-
Senior Member
Originally Posted by
frankeeski
I think I would have contacted Factory Five before I posted a picture on the forum............ But that's just me.
I appreciate the feedback. I posted it to let others know of a potential problem so that they could inspect their own welds, kind of a public service announcement. Didn't realize it would bother anyone.
FYI- FFR has been contacted, waiting for a reply. Thanks
Last edited by ztoolman44; 10-25-2019 at 09:23 AM.
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
Senior Member
Originally Posted by
ztoolman44
I appreciate the feedback. I posted it to let others know of a potential problem so that they could inspect their own welds, kind of a public service announcement. Didn't realize it would bother anyone.
FYI- FFR has been contacted, waiting for a reply. Thanks
The point here is with the advent of social media, seems for many they publish problems on the web without ever giving the supplier a chance to resolve. Posting without doing that first kind of gives the impression they don't care or wouldn't do something about it, and is perhaps unfair. If it were your business (or mine for that matter) would appreciate the chance to be first in line. Not saying that's what you did. Just what the sensitivity is. I agree that weld looks substandard. Based on my experience, they will replace it. I would call them. Sounds like you sent an email? They're better with that than they used to be IMO, but still calling will usually get the quickest response.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
edwardb
The point here is with the advent of social media, seems for many they publish problems on the web without ever giving the supplier a chance to resolve. Posting without doing that first kind of gives the impression they don't care or wouldn't do something about it, and is perhaps unfair. If it were your business (or mine for that matter) would appreciate the chance to be first in line. Not saying that's what you did. Just what the sensitivity is. I agree that weld looks substandard. Based on my experience, they will replace it. I would call them. Sounds like you sent an email? They're better with that than they used to be IMO, but still calling will usually get the quickest response.
Copy that. I apologize if that was the impression that I gave off with my original post. Just wanted others to take a look at their parts to make sure a critical component wasn't a potential failure. It could easily be missed if the parts had arrived powder coated.
I totally agree that FFR will do the right thing and I have been very happy with their customer service to this point and written rave reviews in my build thread. I did send an email and they just replied today so I am happy to report that it will be taken care of.
I still feel it was appropriate to share a safety concern but perhaps could have phrased it a little more clearly so as not to offend. Thanks to everyone for having a civil discussion.
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
Junior Member
Originally Posted by
VIRGIN MIKE
Installed mine today, they looked fine; will reinspect closely tomorrow. (Received my kit about six weeks ago)
Which mounting holes are you using for lower control arms?
Hey Virgin Mike! We spoke to David at FF and he said to use the lower mounting holes.
-
Hey Mike 35, thanks for that, check the last couple of entries an my build Re the lower arms
Mike
-
Senior Member
As expected, FFR has responded to my communication and offered to send out two new control arms as soon as they are available.