Steve, I'm excited too! We need a painting video!!!
Visit our community sponsor
Steve, I'm excited too! We need a painting video!!!
MK4 #9130 , complete kit, arrived 8/10/2017, Street Legal 2/14/2020.
DART SHP 347, EFI, TKO600, IRS
http://thefactoryfiveforum.com/showt...n-Build-Thread
Getting real close now Steve! Can’t wait to see pics.
Kyle
Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.
Thanks Gentlemen,
Now that the body is off I've got a few items that I need to address which are shown below:
1. Cleaning the entire car from stem to stern because it's 100% dusty mess.
2. Installing the Kilmat and upgraded 20 oz. marine carpeting.
... https://www.boatcarpetbuys.com/colle...ss-boat-carpet
3. Installing new steering bellows and adjusting the rack forward so that the bellows better clear the frame.
4. Re-Leveling the car to get it to 4.0" (f) and 4.5" (r) ride height.
5. Getting a proper professional alignment.
6. Adding the horn.
All are easy items, but I won't get to them until the weekend.
Steve
NOTE: Stay Safe Gents, Especially You Dr. Mark!
Last edited by GoDadGo; 04-29-2020 at 06:38 AM.
Great going Steve, won`t be long now!
FFR8237 Donor build 89 GT , MK 4 , T5 , 17 " hallibrands 9" front 10.5 rear ,4×4 headers stainless mufflers, dual chrome roll bars, coil overs all 4,A/C and heater , soft top, 3:55 gears.
Dependable still has a lot to do before color. Feather fill (or equi) block, prime, block prime sand sealer then color.
That's why I brought in some Real Deal Professional Help because this part of the build was way over my head.
Ernie opened Dependable Paint & Body in 1979 after serving four years in the Army and been painting ever since.
Though his shop is small, he is well known in my home town.
NOTE:...Ernie has been painting professionally all the way back to when was a he was a kid in high school when learned to paint at Simplex Motorcycles.
.............He worked a 40 hour schedule after school until late in the evenings to earn his lot in life.
https://en.wikipedia.org/wiki/Simple...ng_Corporation
Last edited by GoDadGo; 04-29-2020 at 05:30 PM.
Just got back from checking out my body and man does it look great.
The car is now wearing it's 1st coat of gray primer after being sealed with black epoxy binder.
The blocking will start next week after a few days of curing before the next shot or two of primer get applied.
Man I'm happy that I asked Ernie and Sammy to tackle this part of the build because not way in hell could I have done better.
1. Went my this afternoon to see the blocked, touched up and retrace coated body.
2. Worked on changing a Rack Bellow and adjust the rack 1/8" forward to give a little more bellow boot clearance.
3. Buttoned up some wiring adjustments and added additional grounds at each corner of the car for the lights.
4. Tomorrow the car will be pulled out and properly cleaned and dried.
5. Sunday we'll be working on installing the KILMAT & CARPET.
Last edited by GoDadGo; 05-02-2020 at 10:56 AM.
I want to see it painted!
Kyle
Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.
Meeeeee Toooooo!
I'll probably get the body back on the car in about 10-12 days.
It looked good in black epoxy binder and even better in gray feather fill, but until it is done it is just like waiting for Christmas to come.
I do feel that it will be Picture of the Month (P.O.M.) worthy since my pals at Dependable Paint & Body are handling this final phase of my build.
Last edited by GoDadGo; 05-02-2020 at 09:50 PM.
1. Adjusted the rack 1/8" forward to give a little more bellow boot clearance.
2. Got help from Doc finding the right size boots so they'll be installed too.
3. Cleaned car and installing the KILMAT, but still have tackle the carpet.
4. Fitted the Dog House (Drivers Footwell) and plan to close it today.
5. Hope to bring it in for an professional alignment tomorrow.
Last edited by GoDadGo; 05-04-2020 at 06:08 AM.
MK4 Build #9035 Delivered 2/17/17, First Start & Go-Kart 6/2/17, Licensed 9/1/17
Paint - Lightning Blue Metallic, No Hood Scoop, No Stripes
Gen 2 Coyote Engine & TKO-600. Solid Axle, 8.8-3.55, Power Steering, Power Brakes, Dual Roll Bars
Heater and Glove Box, Drop Trunk, Wipers, Radio, FFR Vintage Gauges, Custom Dash
Build Thread: http://thefactoryfiveforum.com/showt...MK4-Build-9035
I've got three 60 pound play sand that I picked up from Home Depot to mimic load.
Also, as long as we keep the ride height the same I should be okay.
Thanks Sir Ducky, Thanks!
I Snuck Out At Lunch To Look At Three Different Paint Spray Out Cards.
......The Decision Has Been Made & The Paint Has Been Mixed!
.....Redbone's Red War Paint Has Been Chosen!
Last edited by GoDadGo; 05-07-2020 at 05:44 PM.
I don’t see no red.
Kyle
Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.
Steve, are you going to mess with us and post pics of your blue roadster?
Kyle
Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.
The car is not mine and the suspense is killing me to see it!!
Sure would like to see one do a green one.
Mrk III, 331 stroker, Borla stack injection, T5, 3:55 IRS, Power steering and brakes. Kleiner body & paint
That has some bluish overtones in it, you know my feelings there. There are some different greens that I like, lighter in tone.
Mrk III, 331 stroker, Borla stack injection, T5, 3:55 IRS, Power steering and brakes. Kleiner body & paint
For the record my first color choice was GREEN; however, my better half loves RED!
Hope to shoot a video between, possibly during the spray out.
Baby Go-Dad loves RED too.
Last edited by GoDadGo; 05-11-2020 at 08:53 AM.
Just to be clear, any color that the owner wants is fine with me. I have certain colors preferred over others, but I think I've only seen a couple that "should've" been repainted. None of mine have been painted a traditional cobra color.
Mrk III, 331 stroker, Borla stack injection, T5, 3:55 IRS, Power steering and brakes. Kleiner body & paint
My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
(Most viewed Roadster build thread on this forum!)
Delivered: 6/17/2017
First Start: 12/30/2017
Completed: 12/7/2019
Legal: 1/30/2020
Member of the Mile-Hi Cobra Club
Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread
Rich won’t want to know this but the color I put on his car has more blue in the mix than that green. Don’t tell him
Jeff
I NEED A REFUND.
no jac
Mrk III, 331 stroker, Borla stack injection, T5, 3:55 IRS, Power steering and brakes. Kleiner body & paint
Hit It Kermit!
https://youtu.be/hpiIWMWWVco
A Big Shout Out & Thank You To:
Jeff Kleiner, Henry Renard, Paul Borror & Randy Jones!
Latest Video Shot Tonight:
https://youtu.be/V38Jajo_qOQ
Redbone is getting a proper alignment in the morning.
Last edited by GoDadGo; 05-20-2020 at 08:21 PM.
Great video! You're getting close!
Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount
Thanks Al,
I just got back from the alignment and paint shops.
I was really close on my Eye-Ball / Sheet Rock Square / Level / Angle Finder Method so he, Mr. Buck, was done in 15 minutes...Next I went over to Ernie's (Dependable Paint & Body) to view the back of hood, trunk & doors to okay the color...Then I took a 70-Plus Go Kart Ride and the car tracked straight and felt good.
In summary the car felt controllable and stable so my next tasks is to install the horn, foot box ventilation forward tubes, e-brake and shifter boots then wait for the paint to be perfected.
Steve
Steve
Looking good Steve! Can’t wait to see it painted. One comment though - Dodge color on a Shelby with a bow tie engine...sacrilege!!! thanks for the shout out.
Henry
Nice video, and great progress. Not a whole lot more exciting than seeing the finished body go on the finished chassis. Thanks for the shout out in the video from me as well. Happy to help if I can. I'm just the one with the opinions. You're the one doing all the heavy lifting.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
I finished up the interior this weekend and I surprised myself to say the least once I installed the top of the Transmission Tunnel.
No, it is not up to the level of Sir Edwardb (Paul Borror); however, it looks quite good, rather refined with an elegant flair.
I'll post a video and a new album after we get the body back from paint and it has been properly reassembled.
The link below is Our Youtube Channel in case anybody wants to poke around our build journey.
https://www.youtube.com/channel/UC8m...4orIm7w/videos
And Now We Wait!
Last edited by GoDadGo; 05-31-2020 at 06:18 PM.
We moved the car to my brothers home in anticipation of the storm.
He's about 30 miles away and about 30 feet higher than we are.
Bayou Life Is Fun Until Tropical Storms Come!
Stay safe Steve!!!
Henry