33 Hot Rod Gas Cap Leaking

[hooligan989]

My gas cap started leaking seems like not sealing well, is there a way to fix the fitment or any gasket it needs on gap? Or anyone know where u could get a new cap completely.

[33fromSD]

It this a Gen1 or Gen2 33 HR? Is the "gas cap" leaking or the housing the gas caps screws into?

My Gen2 has an O-Ring on the cap itself which is change able and then the housing has a gasket between the housing and the tank?

If it's Gen1, I know its a different setup so I cannot help with that.

Jim

[FF33rod]

A pic of the exact setup would be helpful as Jim infers.... there's been a few different ways/revisions of the years...

Steve

[hooligan989]

Gen 1, and leaking through cap not the housing, can see a line of fuel running from it down the body

[FF33rod]

Same location that I have mine installed, gen 1 with a Boyd tank.

Question: I don't understand how can it be leaking, the fuel level doesn't sit that high.

Steve

[hooligan989]

Same location that I have mine installed, gen 1 with a Boyd tank.

Question: I don't understand how can it be leaking, the fuel level doesn't sit that high.

Steve

That’s what I was thinking. Seems like it driving hard the fuel spills out. With not even 3/4 or 1/2 tank still spills it thought the cap

[FF33rod]

Maybe it's your 5G starts off the line

The newest gas cap from FFR looks a little different but I don't know if it seals any better for your situation. Have you tried contacting them to let them know it isn't sealing, they may send out another....

Steve

[wallace18]

Those 1st gen caps were glued together. You could try to use JB weld on the underside.