-
rollover valve/vent
Could someone post a picture of the fuel tank rollover valve/vent please?
I've tried three times to get it from Factory Five and they keep sending me a fuel filter.
I have plenty of fuel filters now.
A part number would be awesome. I'm ready to just buy one.
This is the vent that pushes into the grommet at the top of the tank.
Thank You!!
-
I just inventoried my Canadian completion kit
FFR pn#15719 fuel tank vent
The vent screws into a plastic bushing FFR pn#15205 vent bushing. The gasket that goes between the bushing and the tank (no photo because it was on my POL) is FFR pn# 33973 fuel tank vent gasket
Photos of both below.
20230420_220050[1].jpg20230420_220101[1].jpg
The vent is marked TEMCO 90-00945, found it online at this company, there may be others...:
https://www.fillernecksupply.com/1-2...000945-ftav45/
Earl
Last edited by narly1; 04-20-2023 at 09:21 PM.
1st Speedstar in Canada 31 March 2023.
Built by me 302 engine, AOD trans, 3.55 IRS.
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
Senior Member
I have them that I didn't use because I bought the one Breeze Automotive has because it has a larger hose which is better suited to my GM canister that came with my engine. If you can't get them from FFR I'll send them to you for shipping cost.
33 Hot Rod Stage 1, Gen.2 ordered 11/11/2021 started June 12, 2022, LS3 E-Rod crate engine, Tremec TKX, 8.8 WITH 3.55 Ratio and limited slip with 31 spline axles.17X8 and18x10 Race Star wheels wrapped in Conti Extreme contact DWS tires, Mustang Cobra brakes all around. Electric PS and AC. Hard top, electric windows and bike fenders. First Start 5/31/2023. Go-Kart 6/2/2023.
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
Senior Member
MK4#? Ordered 11/30/24
MK4 #11012 picked up 04/16/24
MK4 #10616 picked up 4/10/23 SOLD
MK4 #9759 picked up 4/3/19 SOLD
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Consummate Learner
Originally Posted by
theidlemind
I've tried three times to get it from Factory Five and they keep sending me a fuel filter.
I have plenty of fuel filters now.
A part number would be awesome. I'm ready to just buy one.
I'm dealing with the same crap trying to get my engine install kit... I'm about fed up with the service I'm getting from F5.
-- Mike -- TxMike64 -- @TxMGarage
Gen1.5 Hot Rod '33 #1094 (Stage 1) - 302/AOD '15 IRS - Quad Built - Build Thread
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Been offline for a few days, THANK YOU EVERYONE for the help!!
I'm going to take MasterTech up on his offer so I can install the waterfall and finish up the interior.
dbest
SpeedStar build.
-
Senior Member
Originally Posted by
theidlemind
Been offline for a few days, THANK YOU EVERYONE for the help!!
I'm going to take MasterTech up on his offer so I can install the waterfall and finish up the interior.
dbest
SpeedStar build.
Return PM sent.
33 Hot Rod Stage 1, Gen.2 ordered 11/11/2021 started June 12, 2022, LS3 E-Rod crate engine, Tremec TKX, 8.8 WITH 3.55 Ratio and limited slip with 31 spline axles.17X8 and18x10 Race Star wheels wrapped in Conti Extreme contact DWS tires, Mustang Cobra brakes all around. Electric PS and AC. Hard top, electric windows and bike fenders. First Start 5/31/2023. Go-Kart 6/2/2023.
Thanks: 
Likes: 
Reply With Quote
