![BluePrint Engines](https://www.factoryfive.com/wp-content/uploads/2015/12/BluePrint_Engines_Factory_Five_banner_ad_revised.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
0
-
Seatbelt Options - 3 Point Racing Belts
Anyone have seatbelt advice? My 818 has Subaru sedan belts installed, but the retraction/extension is slow and sloppy - it seems like the angles just don't work out. I'm considering 3-point retractable racing belts like the Corbeau 3-Point, 2" Retractable Harness - has anyone tried something like this?
-
Thinker of thoughts
Can't help you with the racing belts, but I also found the "stock" setup is not very good. Agree the angles aren't great and I've had the passenger one not retract at all once and was a bit of a pain to get it working. I just put some universal retracting ones (shoulder and lap) in an older car (British car and belts from a British car company) that work very well. I'm going to look into putting a set like that in the 818 if I have any more issues with the stock ones.
Rick
-
Senior Member
-
Thinker of thoughts
![Quote](images/misc/quote_icon.png)
Originally Posted by
Dave 53
Yes, that is how I will do it if/when I replace mine. Forget about hiding the retraction stuff inside a panel so it doesn't work properly.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Brown County Customs](https://www.factoryfive.com/wp-content/uploads/2016/08/brown-county-customs.jpg)
Visit our community sponsor