Anyone happen to have these spacers hanging around? MKII era.
Removed to inspect something. Got sidetracked a bit and now they have disappeared into the ether.
spacers.jpg
Visit our community sponsor
Anyone happen to have these spacers hanging around? MKII era.
Removed to inspect something. Got sidetracked a bit and now they have disappeared into the ether.
spacers.jpg
They're nothing special. You can just cut them from some .5 ID x .75 OD tubing.
Jeff
If you can’t cut them perfectly straight then, cut them a little long and file to fit.
Mk4 base kit 7721, 331 Stroker, Holley Sniper EFI, Wipers, Heater, Whitby Soft Top, Drop trunk mod and more
You can also stack up washers. There is no tendency for the coil over to twist so washers will not cause any binding. If you want something a little nicer go to jegs.
https://www.jegs.com/webapp/wcs/stor...0002&langId=-1
Scroll through to pick 1/2" ID in various lengths. If you can't get a perfect length the frame ears will bend pretty easily.
FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.