Looking good! almost thereIs that an orange or red color your are going with?
hmmm...some nice cars in the background as well......57 chevy 210? and a Karmann Ghia
David
Visit our community sponsor
Looking good! almost thereIs that an orange or red color your are going with?
hmmm...some nice cars in the background as well......57 chevy 210? and a Karmann Ghia
David
Charles:
I could not figure out how to link a URL to attach the pictures you asked for...so I'm posting them here. Hope you don't mind. Rear Cover.jpgFront Cover.jpg
Here are some more pictures from the painting process! I originally took the body off and was going to paint everything and then re-assemble the car. After thinking about it more, I figured it would be best to paint the whole exterior while the body was on the chassis and their was a couple reasons for that. The most important thing, I was concerned of scratching the fresh paint while putting the main body back on as it is a little bit of a PITA! The other is because of going with the two tone theme, I wanted to make sure the lines lined up correctly and is much easier to tape off when the body on and with the doors hung.
Prior to putting the body back on, we bagged the entire car for one to keep as much dust off the chassis but also to help keep any overspray from getting in places it shouldn't be. After the car was painted and color sanded, we pulled out all of the plastic.
I still need to download the other pictures from my camera of the car in the spray booth and final paint pics. Will post them soon!
Bagged-the-chassis-for-paint.jpgBody-back-on-ready-for-paint.jpgDash-painted-2.jpgInside-of-door.jpgUnderside-of-hard-top.jpgUnderside-of-hood.jpg
Charles , looks great, look foward to seeing finish picks. I agree w/ you that the two tone should be sprayed w body and doors on, I've done my priming and blocking that way and it worked out well yes a lot more masking but I believe it yields a better result.
Ang
Hello All!!
Wow, its been while since I have been on here and realized I never posted some pics of it completed. Well, it will actually probably never be done since I have more ideas of changes I would like to make but as far as the FFR manual, its basically complete.
I have been enjoying driving the car as much as I possible can. I have pretty close to 1000 miles on the car and it receives a ton of attention and complements along the way....hell I have even convinced a few to buy the FFR kit! They owe me some commissions! lol
Here are some pics I currently have on the computer that most were taken a while ago. The only thing really missing in these pictures is I have since installed the roll bar and headliner.
Anybody on here heading up to Hot August Nights in Reno next month? I am registered and will have the car up there! Let me know if you are going and maybe we can meet up.
Finished car.jpgHood up.jpgInterior set up 2.jpgInterior set up.jpgroadster set up.jpgview of rear side.jpg
Charles
Looks great! I'd love to see it in person, but won't be making it up to Reno this year.
Thanks...definitely enjoying it!
Wow, it's been while since I have been on here. Got close to 2400 miles & enjoying every single mile! Here is one of my favorite photo of the car!
IMG_7928.JPG
Last edited by crspdsk8; 06-18-2017 at 08:15 PM.
Hey Charles. I noticed that there is a spare door key on the keychain for my hot rod. Pretty sure it goes to the door handles that I sent you. PM me your address and I'll mail it out! Eric
"If everything seems to be coming your way, you're probably in the wrong lane."
Haven't been on here in a long time so figured I would update & document a couple things. lol
I have been driving & enjoying the car (just reached 3000 miles) and would rather drive it than work on it. The car has been mostly complete for quite a while with the exception of the carpet in the trunk. I held off putting it in as my plan was and still is, to do the interior in tan leather & carpet and just waiting for that time to actually come. Well it's not coming soon enough so figure I would throw it in for now.
I also did not like the door sills that came with the kit. I wanted something cleaner and to not cover up so much paint, I used the weather stripping rubber that comes with the power windows and ran it along the body edge and up under the dash. Gives it a nicer finished look along fiberglass edge.
I also installed black plastic caps to the bolts holding the waterfall in place.
Caps to cover bolts on interior waterfall.jpgCarpet installed in trunk.jpgWindow weather stripping in place of door sills.jpg
Hello, I have read your entire build page 4 times and love it. Awesome turn out and your car is extremely nice. Gotta be such a great feeling. I ordered my kit and should get it June 9th in Sacramento, Ca. I have a question, because some of your build pics were in photo bucket and couldn't see some of them, could you possibly email me your build pics or is there another way just to get them all. I really like your detailed pics and I know it'll help my dad and I. We have never built a car before and very excited. I work a lot and expect this build to take some time. Thank you in advance big time. Here is my email.
[email protected]
I just read your BIO, you are in Antelope. I would love to see your build . I own 4 Pizza Guys in our area. How cool is that. Thanks
Wow it’s been a while but after the last couple weeks checking out some amazing cars from Hot August Nights & Monterey Car week, I am extremely motivated to finish all the little things that drive me crazy on my Hot Rod build & hopefully take it to another level.
Made a template to make up some interior kick panels to cover up the door latches & inside of the body.
F3BF79B8-C77B-4426-9834-75BA7ACDEF73.jpeg
Hey all! Its been a while since I have been on here but I am looking for some help & guidance in changing over from the FFR supplied Koni to QA1 coil overs.
I am getting older and cant take this stiff ride much longer so I would like to soften up my ride on my Gen 1,serial #600
I am running a Chevy 350 and have the 3 link rear suspension with FFR supplied Koni shocks and springs.
Any help with which QA1 part numbers for the front and rears along with spring lengths and weights would be appreciated. I have searched the forum and am pretty sure I know what I need for the fronts (DD403 w/ 9" springs) but I am not sure on the rears as their are various rear suspension set ups. Who is running a Gen 1 with a 3 link rear suspension with a QA1 set up? What are you using in the rear?
Thanks in advance for your help.
I answered in your duplicate thread: https://thefactoryfiveforum.com/show...124#post560124
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100