Midwest Classic Insurance

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  6
Results 1 to 27 of 27

Thread: Gas-N Standard Pipes?

  1. #1
    Senior Member
    Join Date
    Feb 2022
    Location
    Flower Mound, TX
    Posts
    493
    Post Thanks / Like

    Gas-N Standard Pipes?

    This may not be accurate, but it appears that most people who go with Gas-N pipes choose the Touring (quieter) version. A complete guess based on what I read.

    For those of you with the Gas-N standard pipes, any regrets? Do you still like the sound and volume (two different things)? Mention your engine because that makes a difference.

    I know this is a completely subjective question, and I've seen the good video comparison of the standard vs touring pipes.

  2. #2
    Senior Member Fman's Avatar
    Join Date
    Jan 2020
    Location
    State of Jefferson
    Posts
    1,341
    Post Thanks / Like
    I've owned both and currently have the touring pipes with a 500+HP 427. For me they are plenty loud, still require me to wear ear plugs. I did not want my wife to not like riding in the car and honestly if they were any louder it might be an issue.

    People definitely still hear you coming...
    Build #9818 completed 04/2021 - Dart SBF 427, PF4 EFI, TKO600 Build thread: https://thefactoryfiveforum.com/show...utton-head-mod
    Build review video:https://www.youtube.com/watch?v=k6IAbo2sFt4&t=1111s My finished car: https://thefactoryfiveforum.com/atta...7&d=1638415131

  3. Likes Alan_C liked this post
  4. #3

    Join Date
    Feb 2016
    Location
    Accord NY
    Posts
    521
    Post Thanks / Like
    I have the touring with a gen 3 Coyote and still plenty load and still sounds awesome. As FMan said still use ear plugs.
    MKIV, Coyote Gen3, TKO 500

  5. Likes toadster liked this post
  6. #4
    Senior Member John Ibele's Avatar
    Join Date
    Sep 2011
    Location
    Minneapolis, MN
    Posts
    762
    Post Thanks / Like
    I know you asked for feedback from those with standard pipes, and here you have a third touring pipes owner responding. But one more with zero regrets about the choice. At cruise, it's a very happy sounding burble. But definitely makes itself heard once you get into the throttle. They're the perfect answer in my mind. This is with a stroked SBF making 420ish fwhp.
    MK4 #7838: IRS 3.55 TrueTrac T5z Dart 347
    The drawing is from ~7th grade, mid-1970s
    Meandering, leisurely build thread is here

  7. #5
    Senior Member dstelter's Avatar
    Join Date
    Jan 2019
    Location
    Paige TX
    Posts
    107
    Post Thanks / Like
    ya i agree. Gen 3 coupe with Levy 408 engine its still pretty loud. never installed the factory pipes just Gas N ones. at 65 in 5th the car is almost lugging but you can hold a conversation, just under shouting... but anything over 2k in revs forget about talking. for that i have 2 way headphones. Built my Coupe with "overkill" insulation.

    Doug

  8. #6
    Senior Member
    Join Date
    Sep 2022
    Posts
    547
    Post Thanks / Like
    I have the GAS-N "Standard", but have not installed them yet Remind me in a few months?

    Craig C

  9. #7
    Senior Member
    Join Date
    Dec 2019
    Location
    Mountain, WI
    Posts
    135
    Post Thanks / Like
    I started with the standard pipes and they were too loud for me, made the switch to the touring pipes, much better but still plenty loud. How did I make the switch, Gas-N/Georgie customer service is outstanding, I will leave it at that.

  10. #8
    Senior Member
    Join Date
    Feb 2022
    Location
    Flower Mound, TX
    Posts
    493
    Post Thanks / Like
    Very helpful feedback guys, thanks. The touring seems like the way to go. I've got an LS3, so in terms of sound dynamics it's probably closer to the SBF than the Coyote. I've had some exhaust systems in the past that sounded great, but were hard to live with. I suspect that's the case with the FFR pipes and to some extent the GasN standard pipes.

  11. #9
    Senior Member
    Join Date
    Nov 2018
    Location
    CT
    Posts
    266
    Post Thanks / Like
    I know you are asking about Gas-N and I am not knocking them at all as it is obvious that many here love them. Another, less advertised, option are the Boig Quietpipes. I have them on my Coyote and love them. They sound great and there is no need for ear plugs while driving. They come in bare metal, so I had mine ceramic coated along with Drummer Mike's heat shields, which seems to have eliminated the risk of snake bites. Another plus, they fit perfect with no shims needed.

  12. #10
    Member
    Join Date
    Sep 2024
    Location
    Spencerport, NY - near Rochester
    Posts
    86
    Post Thanks / Like
    So tonight I'm reading about headers and sidepipes, ceramic coatings, etc. My kit will be arriving in November so Im far from needing to decide on this, but this thread seemed like a good place to ask for some education (I have no experience in this area). Based on hearing about Gas-N in the build school, then researching them, talking with Georgie, and reading about them in the forum, I ordered my kit without headers and sidepipes, planning to puchase both from Gas-N. This is where I get confused. I was looking at the polished headers and pipes, then saw photos of the yellowing from heat, which I don't care for. So does this mean I buy unpolished headers and pipes from Gas-N and then have them coated by someone like Jet Hot with a high polish ceramic coating? Thanks in advance for helping me get educated in this arena.

  13. #11
    Senior Member TBull's Avatar
    Join Date
    Dec 2011
    Location
    St. Louis
    Posts
    178
    Post Thanks / Like
    I bought the standard pipes from Georgie and had them drop shipped to my ceramic coater. I wanted them the same as the rest of the headers. I had blued the FFR stainless headers for the short time I ran them. I love the more mellow rumble than the pinging higher tone of FFR. I'm running near 600 hp and they were a game changer for me.
    FFR #4402 MKII Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes, Purchase 8/22/2008 Sold 12/04/2018
    FFR #8249 MK IV "Milano" Kit purchased 10/5/2018 - Graduated with 3.27 IRS, Multiport, Fuel Injected Supercharged 347 Big bore with Coil On Plug running Holley HP engine management, 576 RWHP, 510 Torque
    https://thefactoryfiveforum.com/showthread.php?29980 Milano thread

  14. Likes Nigel Allen, cc2Arider liked this post
  15. #12
    Senior Member danmas's Avatar
    Join Date
    Jan 2019
    Location
    Mead Colorado
    Posts
    336
    Post Thanks / Like
    Blog Entries
    1
    Give Georgie a call and chat with him. He had my headers coated for me. I went with black cause I’m doing a blackout build. That said, give him a call….
    ----
    Mk4 complete kit arrived 10 May 23
    Current BOM

  16. #13
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    10,846
    Post Thanks / Like
    Quote Originally Posted by PMD24 View Post
    So tonight I'm reading about headers and sidepipes, ceramic coatings, etc. My kit will be arriving in November so Im far from needing to decide on this, but this thread seemed like a good place to ask for some education (I have no experience in this area). Based on hearing about Gas-N in the build school, then researching them, talking with Georgie, and reading about them in the forum, I ordered my kit without headers and sidepipes, planning to puchase both from Gas-N. This is where I get confused. I was looking at the polished headers and pipes, then saw photos of the yellowing from heat, which I don't care for. So does this mean I buy unpolished headers and pipes from Gas-N and then have them coated by someone like Jet Hot with a high polish ceramic coating? Thanks in advance for helping me get educated in this arena.
    I've used Gas-N pipes on all my builds. Highly recommended. I haven't used their touring version. But my buddy changed his to the touring version (SBF 306) and they're definitely just a bit quieter. A whole other subject, but you'll still need ear protection no matter what. Between road noise, wind noise, and the side pipe exhaust, regardless of brand or type, you need protection. The sound level will do damage over time. Don't let anyone tell you differently. As far as finishes, Georgie's polished stainless is second to none and what I've always used. In some cases, they will turn a light straw color right around the bend, but it can be restored with a product like Compound 302. For my Coyote builds, the discoloration is almost non-existent. The combustion is very controlled. Your LS might be similar. If you don't want polished SS, then something like ceramic coating might be the way to go. For the headers, there's not much you're going to be able to do to keep them looking new. Even with ceramic coating, they're going to discolor. I have unpolished and uncoated headers in my Coupe from Georgie. They're discolored a lot. But proves it's a driver. Ceramic coating supposedly helps them to run cooler. But hasn't been an issue for me.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
    Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.

  17. #14
    Senior Member Bill Elliott's Avatar
    Join Date
    Jan 2023
    Location
    Woodway, TX
    Posts
    244
    Post Thanks / Like
    Is it illegal to drive with hearing protection?
    Delivery Date 6-24-23 Build thread Living the Dream
    SBF 427 564hp/576tq Holley Sniper with Hyperspark by Smeding Performance. Tremec TKX .68 OD. IRS . Wilwood 12.88 brakes. Wilwood EPB. First start 11-17-23. First go cart 11-20-23.

  18. #15
    JohnK's Avatar
    Join Date
    Sep 2018
    Location
    SF Bay Area, CA
    Posts
    2,359
    Post Thanks / Like
    Quote Originally Posted by Bill Elliott View Post
    Is it illegal to drive with hearing protection?
    I'm guessing that this may vary by state. In California no, it's not illegal to drive with hearing protection (e.g., foam ear plugs). It is illegal to drive with headphones on or earbuds in both ears, so keep this in mind if thinking about using noise cancelling AirPods or similar for hearing protection. That said, I've used both AirPods as well as a Sena Tufftalk headset in the roadster, and never been hassled for it.
    MkIV Roadster build: Gen 2 Coyote, IRS, TKO600. Ordered 10/24/18. Delivered 1/29/19. Engine installed 8/8/21. First start 9/12/21. First go-kart 9/17/21. Off to paint 4/11/22. Back from paint 12/30/22. Build thread here.

  19. #16
    JohnK's Avatar
    Join Date
    Sep 2018
    Location
    SF Bay Area, CA
    Posts
    2,359
    Post Thanks / Like
    I have Gas-N headers and the standard Gas-N side pipes. Yes, they are loud... painfully so without hearing protection. But I never drive without hearing protection so it's not much of an issue. I've never heard the touring pipes to be able to compare, but with hearing protection in I've never wished for the pipes to be quieter.

    With regard to coatings, there's a bit to unpack here. Stainless steel headers will definitely discolor. Stainless steel side pipes will discolor a bit at the bends but can easily be cleaned up as Edwardb says. Beware of the "high polish" coating that Jet Hot and others offer. It will definitely dull and discolor on headers, and will likely also dull and discolor over time on the bends of the side pipes, and it cannot be cleaned up. If going with Jet Hot, I would recommend their Extreme 2000 or Ultra Extreme 2500 for the headers. It's not a shiny finish but will hold up to the heat better over time. If you want polished side pipes, IMO you're better off getting polished pipes from Gas-N and just cleaning them up occasionally.
    MkIV Roadster build: Gen 2 Coyote, IRS, TKO600. Ordered 10/24/18. Delivered 1/29/19. Engine installed 8/8/21. First start 9/12/21. First go-kart 9/17/21. Off to paint 4/11/22. Back from paint 12/30/22. Build thread here.

  20. #17
    Member
    Join Date
    May 2017
    Posts
    79
    Post Thanks / Like
    I have a type 65 coupe, and went with the touring pipes with a gen 3 coyote. The exhaust note is pretty low, but the intensity is definitely high. My neighbors let me know that they can hear when I turn the car on inside their house (I asked). Inside the car, due the frequency, I don't mind the sound at all, and I could easily carry a conversation in the car. Due to the intensity, I'll be using hearing protection on anything but the shortest drives around town. My plan is to have actual glass windows, and seal the car up the best I can. Sound meters are pretty cheap, so I definitely recommend measuring it once you have it set up however you end up going about it. At 85db you have an 8 hour time limit, and that time gets cut in half every 3db higher.

  21. #18
    cv2065's Avatar
    Join Date
    Dec 2017
    Location
    Orlando, FL
    Posts
    2,140
    Post Thanks / Like
    I got the 3" core, aggressive pipes from GasNPipes. Don't know what they sound like yet, but Georgie said they sound great.
    MKIV Roadster - #9380 - Complete Kit - Delivered 7/17/18 - SOLD 5/2023
    Build Thread #1: https://thefactoryfiveforum.com/show...V-Build-Thread
    MKIV Roadster - #TBD - Complete Kit - Delivered 11/6/23 - In Progress
    Build Thread #2: https://thefactoryfiveforum.com/show...Build-Thread-2

  22. Likes danmas, cc2Arider liked this post
  23. #19
    Junior Member
    Join Date
    Feb 2024
    Posts
    2
    Post Thanks / Like
    Just an FYI - my pipes were ordered in April from Gas-N and I still don't have them...I'm having them done in black and they keep telling me that the black ceramic is on back order, which is after they told me they were done, but they found a blemish and sent them back. This has been going on far too long with Georgie at Gas-N. Just a heads up on this company.

  24. #20
    cv2065's Avatar
    Join Date
    Dec 2017
    Location
    Orlando, FL
    Posts
    2,140
    Post Thanks / Like
    Quote Originally Posted by AquaDuck07 View Post
    Just an FYI - my pipes were ordered in April from Gas-N and I still don't have them...I'm having them done in black and they keep telling me that the black ceramic is on back order, which is after they told me they were done, but they found a blemish and sent them back. This has been going on far too long with Georgie at Gas-N. Just a heads up on this company.
    Might be better to have it done locally if you have options like a jobber or Cerakote. A satin sheen is available from them.
    MKIV Roadster - #9380 - Complete Kit - Delivered 7/17/18 - SOLD 5/2023
    Build Thread #1: https://thefactoryfiveforum.com/show...V-Build-Thread
    MKIV Roadster - #TBD - Complete Kit - Delivered 11/6/23 - In Progress
    Build Thread #2: https://thefactoryfiveforum.com/show...Build-Thread-2

  25. #21
    Member
    Join Date
    Sep 2024
    Location
    Spencerport, NY - near Rochester
    Posts
    86
    Post Thanks / Like
    Huge thank you to everyone who weighed in on my question. Seems like GasN is still a great choice and that I would have the pipes shipped direct from them to the coater. I did speak with Georgie a few weeks ago and then started reading about coatings. That prompted me to put my questions out there to be sure I understood things correctly before I speak with him again.

    edwardb and JohnK... if I don't like the yellowing should I be going with the GasN high polish and just clean them up as neeeded and have the headers coated with a high temp ceramic high polish?

    Thanks again to all.

  26. #22
    Senior Member JMD's Avatar
    Join Date
    Mar 2024
    Location
    Kansas City, MO
    Posts
    235
    Post Thanks / Like
    I got the black ceramic coated touring side pipes from Georgie this past Spring. Took about 4 weeks to receive. From everything I've heard about Georgie and my experience with him buying my headers and pipes, he will make sure it's made right.

    Love my touring pipes. They do cost a bit of top end power, but sound great and don't hurt the ears. Can carry on a conversation in the car. Just what I was looking for.
    Build thread: https://thefactoryfiveforum.com/show...809#post556809

    MKIV received 5/15/24

    Blueprint 302 tuned by Mike Forte, TKX midshift, IRS, PS, Wilwoods

  27. #23
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    10,846
    Post Thanks / Like
    Quote Originally Posted by PMD24 View Post
    edwardb and JohnK... if I don't like the yellowing should I be going with the GasN high polish and just clean them up as needed and have the headers coated with a high temp ceramic high polish?
    If you want the polished SS side pipe look, then yes. Get the headers coated if you want. I've had them both coated and not coated as I mentioned, In either case, at least in my experience, don't expect them to stay looking polished.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
    Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.

  28. #24
    25th Anniversary #9772 toadster's Avatar
    Join Date
    May 2011
    Location
    Folsom, CA
    Posts
    1,914
    Post Thanks / Like
    love my touring pipes with my Gen3 Coyote, can actually have a conversation until you hit about 60 mph on the highway then it's just the wind noise...

    in comparison, a local owner has stock side pipes and we both were dyno'ed at the same place, he puts down 50 more RWHP than I do - same engine
    Todd
    25th Anniversary MkIV | #20 of 25 | Build #9772
    https://cobradreams.com/ <- my build!

  29. #25
    Senior Member
    Join Date
    Jul 2021
    Location
    Big Canoe, GA
    Posts
    245
    Post Thanks / Like
    Quote Originally Posted by Bill Elliott View Post
    Is it illegal to drive with hearing protection?
    I asked my local constabulary (Pickens Co., GA) that question when he came to sign off my paperwork for a GA title application and I gave him an audition of the GAS-N Touring pipes on my BPE 347. He told me the 'short' answer is that it is illegal to wear headphones, earbuds, or earplugs in both ears while driving in the state of Georgia. This includes any type of device that covers both ears and blocks out sound from the environment around you. However, there was no proscription on hearing devices, such as hearing aids but after a few throttle blips, he said if I didn't use them, I was an idiot. I told him I was already half deaf from too much R&R playing in my music career and hearing aids are now a necessity. A set of Sony noise cancelling headphones works marvelously. And besides, with the exhaust port a few feet from your ears, you most likely couldn't hear warning road sounds anyway while underway. It would become a legal contest in a court if I were to cause an accident while wearing headphones. If no accident, well then, no harm, no foul.
    Art Shand, Big Canoe GA
    BPE 347 FI, Hydraulic Tremec TKX, Wilwood front & rear, GAS-N Headers/Touring Pipes, many functional upgrades.

  30. #26
    Senior Member
    Join Date
    Mar 2011
    Location
    Heart of Dixie, Alabama
    Posts
    1,932
    Post Thanks / Like
    I guess motorcycle helmets are illegal in GA?
    20th Anniversary Mk IV, A50XS Coyote, TKO 600, Trunk Drop Box, Trunk Battery Box, Cubby Hole, Seat Heaters, Radiator hanger and shroud.

  31. #27
    Senior Member
    Join Date
    Jul 2021
    Location
    Big Canoe, GA
    Posts
    245
    Post Thanks / Like
    Ha! Based on the State's logic, you'd think they would be.
    Art Shand, Big Canoe GA
    BPE 347 FI, Hydraulic Tremec TKX, Wilwood front & rear, GAS-N Headers/Touring Pipes, many functional upgrades.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor