-
Not a waxer
Wheel fit with Wilwoods
Has anyone tried either of these with Wilwoods and can confirm whether they do or do not clear the calipers front and rear?
https://lmr.com/item/SVE-56489653K/M...9-10-Gun-Metal
https://lmr.com/item/WK-0880656/sve-...0-bronze-94-04
Thanks!
Jeff
-
Senior Member
I have 18x10 wheels front and back on my 35 Truck along with the Wilwood brakes. I have had no issues with clearance at all. I think I could easily another inch of Rotor diameter and still have room for the calipers.
Wheels.jpg
left front.jpg
I think what you will want to look at is the offset. My wheels were for a standard 2009 mustang offset, while there was no clearance issue with the caliper to the spokes of the wheel, The wheels set in a little deep, to the point where the turn radius was limited because the wheel would hit the lower control arm. I added a spacer to find the correct offset 2 inches worth, then got wheels with that offset that looked and functioned much better.
-
2016 Mk4 Challenge Car, IRS, 3.31 Torsen, RDI Aluminum 427w, AFR 225s, Vic Jr. ProSystems 780 HP, TKO-600 w/Liberty mods. Forward cage. Levy 6/4 piston Wilwoods. Not completed yet, will be a streetable track car.
2004 Superformance MkIII #1855, 2007 Superformance MkIII #2584 purchased in 2012 both sold.
-
Steve >> aka: GoDadGo
I've seen those on a 2000-Ish Mustang GT and they looked really good so I'm sure they'll be a great fit on a MK-4.
Also, here is a link to some wheels I was considering putting on the REDBONE ROADSTER from Circuit Performance.
The backspacing on these wheels is spot on perfect; however, you'd need HUBCENTRIC rings to properly center them.
https://circuitperformance.com/categ...asic%5Bgray%5D
-
On a roll
No Halibrands on the new Kleinermobile?
Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount
-
Not a waxer
Originally Posted by
Al_C
No Halibrands on the new Kleinermobile?
Don't dislike them but kind of tired of/bored with them. 
Thanks for the replies guys! Don't know for sure if these will be what I use (heck, I haven't even finalized what engine I'm going to use yet!) but confirmed that they should work so they'll stay on the short list. Thanks to "racingandfishing" Robert who hooked me up with some pics of "460.465USMC" Chris's new Coupe wearing the SVE wheels and Wilwoods.
Jeff
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Any idea if these are available in 19's? I did a quick search but couldn't come up with anything.
Coupe complete kit ordered: 9/26/24. Gen 4 Coyote. T-56. IRS w/3.73. Wilwoods. PS. HVAC. Side windows.
Thanks: 
Likes: 
Reply With Quote
