BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Take a look at this tire...need advice

  1. #1
    Member cwrandolph's Avatar
    Join Date
    Feb 2011
    Location
    Sidney, OH
    Posts
    54
    Post Thanks / Like

    Take a look at this tire...need advice

    Working on my 2013 Explorer. I have been hearing road noise - sort of growling or rumbling. It has a beat corresponding to the speed of the vehicle and I can feel it very slightly in the steering wheel. I have convinced myself that it's the front passenger wheel bearing so I removed the wheel and planned on replacing the bearing/hub tomorrow. I have been fooled by noisy tires in the past so I inspected it closely. These tires are nearing the end of their life (not quite down to the wear bars yet). The marks in the picture are pretty much all the way around the tire. This is the inside edge of the tire. Early stages of cupping? Everything seems tight and all tires are wearing evenly. Thanks in advance for any advice.

    exp tire2 111924.jpg

  2. #2
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    I'd replace the wheel bearing if it's indeed bad, and then get a good front end alignment.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor