BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 22 of 22

Thread: Help Identifying This Spring

  1. #1
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like

    Help Identifying This Spring

    I found this little guy sitting on the driver's upper floor, below the steering shaft. I have been working on wiring, and I removed my dash (temporarily installed) to work on the wiring behind the dash. I think this spring showed up after I removed my dash. I can't find anything in the dash that this might go to.

    Thanks!

    Greg

    20241125_135109.jpg
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  2. #2

    Join Date
    Feb 2011
    Location
    Norton, MA USA earth
    Posts
    3,480
    Post Thanks / Like
    Looks similar to the one in the Russ Thompson turn signal.
    Mike

  3. #3
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by michael everson View Post
    Looks similar to the one in the Russ Thompson turn signal.
    Mike
    Sadly, I don't have Russ's turn signal. I'm just using the kit-supplied toggle.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  4. #4
    Senior Member
    Join Date
    Jan 2012
    Location
    Central OK
    Posts
    136
    Post Thanks / Like
    My headlight switch has a sprung button you press to release the shaft. Could it be from a headlight switch?

    -Kyle

  5. #5
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by kgkeys View Post
    My headlight switch has a sprung button you press to release the shaft. Could it be from a headlight switch?

    -Kyle
    That's a good guess. I just checked mine, and my sprung button is still intact. The headlight switch spring is about the same size as the little guy in question, but the unidentified spring is stiffer.

    Greg
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  6. #6
    Senior Member Norm B's Avatar
    Join Date
    Mar 2012
    Location
    Head of St Margarets Bay, Nova Scotia
    Posts
    1,065
    Post Thanks / Like
    Brake light or clutch safety start switch?

    Norm
    Mk4 base kit 7721, 331 Stroker, Holley Sniper EFI, Wipers, Heater, Whitby Soft Top, Drop trunk mod and more

  7. #7
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by Norm B View Post
    Brake light or clutch safety start switch?

    Norm
    Another great guess, but both seem to be intact.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  8. #8
    Senior Member
    Join Date
    Jun 2023
    Location
    Texas Hill Country
    Posts
    204
    Post Thanks / Like
    Did you take a pen apart for another use…..?IMG_1131.jpg
    BUDFIVE
    Complete kit order 8/28/2023
    347 Ford Dyno 10/12/2023
    Kit Delivery 11/28/2023
    First Start 7/4/2024
    Go Cart 8/31/2024

  9. #9
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    I didn't, but wondering if this spring is off of a tool I'm using. I don't recall any spring-loaded tools. Hummm...
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  10. #10
    Senior Member
    Join Date
    Oct 2019
    Location
    Erin, Ontario CANADA
    Posts
    999
    Post Thanks / Like
    Horn button?
    1st Speedstar in Canada 31 March 2023.
    Built by me 302 engine, AOD trans, 3.55 IRS.

  11. #11
    Senior Member Rdone585's Avatar
    Join Date
    Jul 2020
    Location
    Near Milwaukee, WI
    Posts
    357
    Post Thanks / Like
    From a broken cleco? Or perhaps from one of your quick clamps?
    MkII: 408 Dart block dry sump, 750cfm carb, G-Force T-5, 8.8 rear with 3.55 gears, 3-link, Kirkey seats, black ceramic coated twister mufflers with shields and adjustable turn down tips, passenger roll bar, front and rear roll bars. 2020 GT500 Magnetic metallic, with white and lime green stripes.

  12. #12
    On a roll Al_C's Avatar
    Join Date
    Aug 2014
    Location
    Wheaton, IL
    Posts
    1,470
    Post Thanks / Like
    Well, it certainly didn't come from the spark plug... Seriously, I looked at my dash, and I can't see anything that would have that kind of spring
    Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
    Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount

  13. #13
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by Rdone585 View Post
    From a broken cleco? Or perhaps from one of your quick clamps?
    I thought about a cleco, but I've looked all of mine, and they're all intact. I'm at a loss.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  14. #14
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by narly1 View Post
    Horn button?
    Horn button is good.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  15. #15
    RJD's Avatar
    Join Date
    Jan 2017
    Location
    Northern Virginia
    Posts
    819
    Post Thanks / Like
    Are you missing a coil over?
    MKIV complete kit w/powder coating and cut outs, serial #9189 delivered 10/10/17, first start - 10/5/18, legal - 10/08/20. Blueprint 306 w/Holley Sniper EFI, TKO 600, power steering, Breeze fan shroud, trunk cubby, & engine compartment battery kit, CNC brake reservoirs, RT turn signal & gas pedal, mechanical throttle linkage, METCO safety loop, GASN side pipes, drop trunk, dual chrome roll bars, vintage gauges, glove box, custom center console, cup holders, and speakers.

  16. #16
    Indy Shu's Avatar
    Join Date
    Feb 2011
    Location
    Indianapolis, IN
    Posts
    173
    Post Thanks / Like
    Do you have an NRG quick release hub? There’s a spring in there but I can’t remember how big. ��
    John
    Gen 3 Coupe #334 received 11/4/21. Coyote, IRS, TKX, Wilwoods
    '02 GT donor, 4.6 sohc, Received #5488 on 5/29/06. 3-link, ps, pb. Hoosier Cobra member (Hoosiercobra.com)

  17. #17
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by Indy Shu View Post
    Do you have an NRG quick release hub? There’s a spring in there but I can’t remember how big. ��
    I don't.
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  18. #18
    Member MaxVmo's Avatar
    Join Date
    May 2023
    Posts
    92
    Post Thanks / Like
    Have you disassembled a Colt 1911 recently? Still looking for that spring….

  19. #19
    Senior Member CraigS's Avatar
    Join Date
    Feb 2011
    Location
    Blacksburg, Va
    Posts
    4,975
    Post Thanks / Like
    Set it aside where it won't get lost and move on. Eventually it's use will show up.
    FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.

  20. #20
    Senior Member Bill Elliott's Avatar
    Join Date
    Jan 2023
    Location
    Woodway, TX
    Posts
    244
    Post Thanks / Like
    My wire strippers have a spring like that.
    Delivery Date 6-24-23 Build thread Living the Dream
    SBF 427 564hp/576tq Holley Sniper with Hyperspark by Smeding Performance. Tremec TKX .68 OD. IRS . Wilwood 12.88 brakes. Wilwood EPB. First start 11-17-23. First go cart 11-20-23.

  21. #21
    Senior Member gbranham's Avatar
    Join Date
    Jul 2021
    Location
    Tonganoxie, KS
    Posts
    830
    Post Thanks / Like
    Quote Originally Posted by CraigS View Post
    Set it aside where it won't get lost and move on. Eventually it's use will show up.
    Yep, that's what I've settled on.

    Greg
    Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
    Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, Amazon
    MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges

  22. #22
    Senior Member ggunter's Avatar
    Join Date
    Jun 2020
    Location
    Rising Sun , Md.
    Posts
    1,030
    Post Thanks / Like
    That is a spark plug coilator spring. It provides the spring energy for the electricity to jump the gap in the plug.
    FFR 9883 MKIV ,427 Windsor engine
    TKX 5 speed, Three Link 3.55 gears
    Power Steering, Leather Seats
    18" Wheels and Tires, Drop Trunk
    Fun Package

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor