Boig Motorsports

Visit our community sponsor

Thanks Thanks:  11
Likes Likes:  4
Results 1 to 14 of 14

Thread: Rebostar's sunny day beauty pics plus DMV saga.

  1. #1
    Senior Member Rebostar's Avatar
    Join Date
    Jan 2024
    Posts
    603
    Post Thanks / Like

    Rebostar's sunny day beauty pics plus DMV saga.

    As promised here are the sunny day bueauty pics of the finished Roadster while at the DMV.
    Speaking of the DMV.....I call the state DMV office to get the inside skinny from the head shed. I sometimes take issue with counter beuracrats who's sole aim is in gaurding their rice bowl rather that helping you out. However todays visit went very smoothly. I had a new Oregon VIN# in 10 minutes. The registration was a bit dicey though. In Oregon they have "special" plates for cars older than 25 years. They have a one time fee then they're good forever. All three of my classic hot rods have them. At first she did not want to give them to me because the car was "manufactured" in 2024 even though it was a 1965 "replica". I told her it would be impossible to pass DEQ with an engine from the 60's. She got my point and issued the "special" plates. So a half hour from walking in the door I had my VIN, title, registration and plates all for $234.

    Heres the pic's enjoy!

    DMV1.jpgDMV2.jpgDMV3.jpgDMV4.jpgDMV5.jpgDMV6.jpgDMV7.jpgDMV8.jpg

  2. Likes F500guy, Mike.Bray, BornWestUSA liked this post
  3. #2
    Member
    Join Date
    Sep 2022
    Location
    Ogden utah
    Posts
    38
    Post Thanks / Like
    Blog Entries
    2
    It's beautiful this is similar to what I'm doing, it sure gives me a vision as to
    what mine may look like. Thanks for sharing your journey.

  4. Thanks Rebostar thanked for this post
  5. #3
    Senior Member Nigel Allen's Avatar
    Join Date
    Oct 2012
    Location
    South Australia
    Posts
    644
    Post Thanks / Like
    Hi Allyn,

    Pics look great. Have been waiting to see this colour in the sun. It doesn't disappoint.

    Maybe it's that angle of the photos, is it possible that the bumperettes are on the wrong ends of the car? Rear bumperettes look angled instead of vertical.

    Hope you get some miles on the clock before the weather sets in.

    Cheers,
    Nige
    Mk.4 FFR supplied Right hand drive
    Received 12/2012 completed 12/2019
    Gen1 Coyote / TKO600 / IRS
    Lots of mods to make compliant for Australian design rules

  6. #4
    Senior Member Rebostar's Avatar
    Join Date
    Jan 2024
    Posts
    603
    Post Thanks / Like
    Quote Originally Posted by Nigel Allen View Post
    Hi Allyn,

    Pics look great. Have been waiting to see this colour in the sun. It doesn't disappoint.

    Maybe it's that angle of the photos, is it possible that the bumperettes are on the wrong ends of the car? Rear bumperettes look angled instead of vertical.

    Hope you get some miles on the clock before the weather sets in.

    Cheers,
    Nige
    Thanks for the kudo's Nige. My cell camera really does not do it justice. Its way better with eyeballs! On the rear bumperett's. I drilled the threads out so the 1/2" threads-all would slide throught the origonal holes and I have nuts on each side of the bumperette mount plates to lock them in place. So they are adjustable. I set them up to match the curve of the rear end rather that straight up and down.

  7. Thanks Norm B thanked for this post
    Likes Nigel Allen liked this post
  8. #5
    Senior Member Rebostar's Avatar
    Join Date
    Jan 2024
    Posts
    603
    Post Thanks / Like
    The above pic's were taken with my cell phone. I also brought my digital camera and took a few. Not sure which is better, but niether of them really bring out the pearl in the paint like the naked eye.
    So here's the set with the digital camera:

    DSC03894.JPGDSC03895.JPGDSC03896.JPGDSC03897.JPGDSC03898.JPGDSC03899.JPGDSC03900.JPG

  9. #6
    Senior Member Higgybulin's Avatar
    Join Date
    Dec 2017
    Location
    Southern Ontario/Cape Coral FL
    Posts
    610
    Post Thanks / Like
    I don't really see any snow in them pics. Time to put some miles on it!! Looks great, I will be looking for the update after you giv'er a few shake down runs!
    Higgy
    MK4 #11173 picked up 01/20/25
    MK4 #11012 picked up 04/16/24
    MK4 #10616 picked up 4/10/23 SOLD
    MK4 #9759 picked up 4/3/19 SOLD

  10. Thanks Rebostar thanked for this post
  11. #7
    Senior Member ggunter's Avatar
    Join Date
    Jun 2020
    Location
    Rising Sun , Md.
    Posts
    1,059
    Post Thanks / Like
    Glad to see it all went well at the MVA. Some states are good at that and others a nightmare. I feel so bad for our California brothers who deal with the bureaucracy. It just doesn't have to be that bad. Car looks beautiful outside in the sun.
    FFR 9883 MKIV ,427 Windsor engine
    TKX 5 speed, Three Link 3.55 gears
    Power Steering, Leather Seats
    18" Wheels and Tires, Drop Trunk
    Fun Package

  12. Thanks Rebostar thanked for this post
  13. #8
    Senior Member TTimmy's Avatar
    Join Date
    Sep 2021
    Location
    Emmaus, PA
    Posts
    127
    Post Thanks / Like
    I’ve really enjoyed following along the build thread. Congrats on the DMV win. Seems like a roll of the dice in many states.

    Looking forward to your coupe build!

  14. Thanks Rebostar thanked for this post
  15. #9
    Senior Member
    Join Date
    Sep 2022
    Posts
    564
    Post Thanks / Like
    Looks great and congratulations on getting your point across to the DMV

    Craig C

  16. Thanks Rebostar thanked for this post
  17. #10
    Senior Member mrglaeser's Avatar
    Join Date
    Jan 2020
    Location
    Twin Cities, MN
    Posts
    231
    Post Thanks / Like
    Love Pics! Congrats on registration.

    That was a much shorter DMV 'SAGA' than I expected, which is a good thing. After seeing some of the Florida stories lately I was prepared for a much harrowing adventure at the DMV.
    Mark IV, 302 Based 347, TKx, Four link w/3.55, coil overs, PS, 4wheel Willwood. Dark Blue w Black/Red stripes, Saddle Interior, Blacked out chrome.
    Kit Ordered 4/18/2022
    Kit Delivered 2/20/2023
    Engine Install 9/15/2024

  18. Thanks Rebostar thanked for this post
  19. #11
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,771
    Post Thanks / Like
    Looks absolutely fantastic Allyn! And I stand by my opinion that stripes would have added nothing

    Enjoy!

    Jeff

  20. Thanks Rebostar thanked for this post
  21. #12
    Senior Member PNWTim's Avatar
    Join Date
    Nov 2020
    Location
    Damascus OR USA
    Posts
    282
    Post Thanks / Like
    Looks beautiful. Glad to hear Oregon DMV is cooperative. I had a Vermont registration and title on a vehicle that I transferred to Oregon sometime back. I went in with all my documentation and they were a little dumbfounded. They finally went a got an oversized book that looked like something out of Harry Potter and got it figured out so all was well that ended well.

    I'll be going through this with my Coupe in a year or two so thanks for keeping them on their toes!
    Build 1 - 1969 Camaro Build Thread Here: https://www.camaros.net/threads/tims...y-getter.45926
    Build 2 - 1965 Daytona Coupe # 620 Build Thread Here: https://thefactoryfiveforum.com/show...-Type-65-Build

  22. Thanks Rebostar thanked for this post
  23. #13
    Senior Member Mike.Bray's Avatar
    Join Date
    Dec 2021
    Location
    Flower Mound TX
    Posts
    1,363
    Post Thanks / Like
    Car looks absolutely amazing Allyn! My kind of Cobra, pushrod V8, candy paint, and some bling hahaha

    Glad all went well at the DMV, when I sailed through my registration process at our local DMV I sure had a little spring in my step walking out! Such a great feeling.

    Now go drive and have some fun!
    Last edited by Mike.Bray; 01-16-2025 at 01:59 PM.
    My build thread https://thefactoryfiveforum.com/show...Roadster-Build

    Thread on Stainless Steel AN brake lines.

    Thread on fasteners and torque wrenches.

  24. Thanks Rebostar thanked for this post
  25. #14
    Member Wizbangdoodle's Avatar
    Join Date
    Nov 2023
    Posts
    67
    Post Thanks / Like
    Outstanding! Love the paint and the entire build. I hope to have as smooth a visit to the DMV here in Washington as you've had in Oregon. Sadly, I think that may not happen.

  26. Thanks Rebostar thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Julio Car Custom

Visit our community sponsor