![BluePrint Engines](https://www.factoryfive.com/wp-content/uploads/2015/12/BluePrint_Engines_Factory_Five_banner_ad_revised.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
0
-
-
That's a new one for me. I suspect the adapter may be machined wrong. I would call FFR on Monday or Tuesday if the are celebrating the holiday.
Mike
-
PLATNUM Supporting Member
After talking to FFR and some help from the other forum I made a 1/8" washer to shim the adapter up and it works fine now.
-
Yes I did. Called IDIDIT. They instructed me to put a 1 or 2 wraps of clear tape, the kind you use for Xmas wrap, around the lower part below the splines. That worked to my surprise.Simple and easy solution.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Martin's Dent and Collision Shop](https://www.factoryfive.com/wp-content/uploads/2019/02/martins-dent-shop.jpg)
Visit our community sponsor