What would need to be done to modify STI spindles to work with the 818?

[icky]

*EDIT* A second option would be to purchase new/use 2004 STI spindles and hubs, as the 06 STI Brembos would bolt up to them. A complete new set of front and rear knuckles+hubs+bearings is about $1600. Of course this assumes the rear 04 STI hubs are the smaller spindle... hmmm..


Jeff

you are still left to figure out the rear spindles, I believe DSS makes FFR's axles but either way they have the tooling to make the axles you need. STI front inner and STI rear outer splined axle-shafts.