Challenge series info

[Bill Waters]

Thanks, Tony;

TIG welding a bung will be no problem, though welding cast material can be problematic, depending on the material. Preheating it will likely preclude any issues, though. Will make sure I address the dipstick.

Many thanks, and thanks for the pic.

Bill

[FFRSpec72]

Thanks, Tony;

TIG welding a bung will be no problem, though welding cast material can be problematic, depending on the material. Preheating it will likely preclude any issues, though. Will make sure I address the dipstick.

Many thanks, and thanks for the pic.

Bill

I used a TIG