Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Here is a picture of mine that I took when I was figuring out how much I needed to cut off of the rod.
I also had the set screw wrong in this picture and was not using the small one they provided.
-
EFI Rules and Carbs Drool
Originally Posted by
TDSapp
Here is a picture of mine that I took when I was figuring out how much I needed to cut off of the rod.
I also had the set screw wrong in this picture and was not using the small one they provided.
I think the guys hit the nail on the head, it doesn't look like you have the correct joint at the firewall. Unless you have a Coyote or other engine than needs extra clearance, the third bearing is unnecessary.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor