SS383 Build - 33 Hot Rod #1134

[33fromSD]

Looks good Peter. Get some Evercoat Rage Extreme body filler, it's the easiest stuff I ever worked with. I started using this stuff a few cars before the 33 (found out it also worked good on fiberglass) and am using it once again on my 55 F100 I'm currently doing.

It's spendy, but as the saying goes, you get what you pay for.

Jim

https://www.amazon.com/Evercoat-120-...s%2C130&sr=8-5

[peterh226]

Looks good Peter. Get some Evercoat Rage Extreme body filler, it's the easiest stuff I ever worked with. I started using this stuff a few cars before the 33 (found out it also worked good on fiberglass) and am using it once again on my 55 F100 I'm currently doing.

It's spendy, but as the saying goes, you get what you pay for.

Jim

https://www.amazon.com/Evercoat-120-...s%2C130&sr=8-5

I used that in several places. I agree it works great - especially if you sand it quickly. I'm using some glaze type filler now to get the pin holes. Doors have another cost of primer and now back to sanding that down. The end is in sight on the doors...

[33fromSD]

I used that in several places. I agree it works great - especially if you sand it quickly. I'm using some glaze type filler now to get the pin holes. Doors have another cost of primer and now back to sanding that down. The end is in sight on the doors...

Your progress is looking good Peter.

If interested Evercoat makes a good finishing / blending putty too which sands very easy.

Jim

https://www.amazon.com/Fibreglass-Ev...s%2C186&sr=8-5