What your break in method? On the basic forum if you ask they say ask you engine builder. But I have a brand new stock block still 257 so I don't know who he/she was to ask. Thx
Visit our community sponsor
What your break in method? On the basic forum if you ask they say ask you engine builder. But I have a brand new stock block still 257 so I don't know who he/she was to ask. Thx
Prime oil pressure till oil light goes out or around 15-20 psi on a gauge.
Make sure engine is running correctly, right tune and no vacuum or other leaks ,
Use break in oil in my post #939 and drive with it for 50-60 miles and drain
Fill with a recommend oil, I like Rotella T6
Keep boost and rev lower for the first 1000 miles with occasional gradual pulls.
818S frame #13 Jdm version 8 ej207