DSCN0583.JPGDSCN0585.JPGDSCN0586.JPGDSCN0587.JPGDSCN0588.JPGHere are a few shots of what I had Tim Whittaker at Kootenai Customs make for me, the use of riv-nuts installed from the top of the floor makes a great spacer when the button head screws are installed from the bottom. I installed the exhaust first then installed the floor for marking from the underside, then removed the floors and installed the riv-nuts and screwed in place the heat shields. Thanks Tim for the quick turnaround! I saw this on the forum and I don't recall whose idea I used but thank-you!