Harley
I did the exact same things tonight, except I didn't take pictures.
One other thing I also did, is set the height of the bumper.
It is supposed to be 1/2" higher than the bottom of the cockpit. I bought a 10 foot piece of 1.5" square unistrut steel from lowes ($20).
I jacked this up against the bottom of the car leaving it stick out the front. The bar in the nose ended up with 1" between the bar and the lower fiberglass edge. I will make a spacer tomorrow. I am close to clecoing (if that is a word) my body to my frame.

I have not touched my doors yet.
Bob