What seats do you have for the 818S

[Bob_n_Cincy]

Michael and I both need wookie seats.
6'0" #290 & 6' 3" #270
Our requirement was enough legroom and helmet lower than roll bar.
Seat: Kirkey KIR-47900 Aluminum, Intermediate Road Race, 15 Degree Layback, 18 in. Hip Width
Cover:KIR-47941 Black tweed cloth

To get us low enough, we mounted the direct to floor/cross bars of the 818. (no side brackets)
To get them back far enough we reshaped the seat. At 16" above the floor we cut the seat and welded to 0 degrees layback the rest of the way up. This satisfied our requirement but forced us to relocate the gas tank.

We have sat in the seats for three 2 hour autocross sessions with no complaints.

P1050108ss.jpg

DSC_9235.jpg