Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 13 of 13

Thread: trans dogbone

  1. #1
    Senior Member
    Join Date
    Jul 2014
    Location
    Strathroy, Ontario Canada
    Posts
    479
    Post Thanks / Like

    trans dogbone

    just out of curiosity I noticed after watching some videos of people driving there 818s the rear trans moves up alot when under load while driving I know people are going to the harder mounts but has any one thought of making mounts on the frame at the rear and securing the trans down with a hard dog bone mount that has a slight bit of play but stops it from moving as much as it does.

    I know the drag racing guys used to put a piece of chain on the frame to the front corner of the engine to prevent the engine from lifting under heavy loads when launching.

    thoughts?

  2. #2
    Senior Member metros's Avatar
    Join Date
    Jun 2013
    Location
    NoVA
    Posts
    1,064
    Post Thanks / Like
    I know there has been at least 1 person to put a mount at the rear of the trans to stiffen it up. Can't recall who but they posted a picture.

  3. #3
    Mechie3's Avatar
    Join Date
    May 2012
    Location
    Indianapolis
    Posts
    5,174
    Post Thanks / Like
    Matteo iirc.
    Zero Decibel Motorsports
    Check out my new website!
    www.zerodecibelmotorsports.com
    www.facebook.com/zero.decibel.motorsports

  4. #4
    Senior Member
    Join Date
    Jul 2014
    Location
    Strathroy, Ontario Canada
    Posts
    479
    Post Thanks / Like
    I will look into it and see, it seems to make sence, the stock subaru had the upper dog bone from the firewall to the engine I am guessing that is what that was for on the WRX?

  5. #5
    Senior Member billjr212's Avatar
    Join Date
    Feb 2011
    Location
    Frankfort, IL
    Posts
    734
    Post Thanks / Like
    Yup. Called a pitch stop on the WRX. The person that did it on here used something off of an Impala, I think

  6. #6
    Senior Member matteo92065's Avatar
    Join Date
    Feb 2014
    Location
    Ramona, CA
    Posts
    417
    Post Thanks / Like
    Yes, I put one in. I have recently put in stiffer mounts all around. The engine does want to move around, most noticeably in first gear around parking lot type driving.

  7. #7
    Senior Member metros's Avatar
    Join Date
    Jun 2013
    Location
    NoVA
    Posts
    1,064
    Post Thanks / Like
    Wasn't there another builder who put one right at the tail end of the transmission?

  8. #8
    Senior Member
    Join Date
    Jul 2014
    Location
    Strathroy, Ontario Canada
    Posts
    479
    Post Thanks / Like
    Just installed one on the tail end of the trans using an old sway bar end link, if it seems to work I will put something a little stronger. When I am ready I will video tape the engine trans with and without it.
    I have pics on my build blog.

  9. #9
    Senior Member RM1SepEx's Avatar
    Join Date
    Jul 2011
    Location
    Freeport, ME
    Posts
    3,801
    Post Thanks / Like
    Quote Originally Posted by metros View Post
    Wasn't there another builder who put one right at the tail end of the transmission?
    Erik T did IIRC
    Dan

    818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14

  10. #10
    Senior Member D Clary's Avatar
    Join Date
    Aug 2013
    Location
    Santa Rosa CA
    Posts
    407
    Post Thanks / Like
    818 rear mount 001.JPG This is what I did it is of of an early 2000s gm car. cost like 12 buck from orielys

  11. #11
    Senior Member metros's Avatar
    Join Date
    Jun 2013
    Location
    NoVA
    Posts
    1,064
    Post Thanks / Like
    That was the picture I was thinking of. Thanks!

  12. #12
    Senior Member
    Join Date
    Mar 2011
    Location
    Denver, CO
    Posts
    1,362
    Post Thanks / Like
    Quote Originally Posted by D Clary View Post
    818 rear mount 001.JPG This is what I did it is of of an early 2000s gm car. cost like 12 buck from orielys
    Any idea which GM?

  13. #13
    Senior Member
    Join Date
    Oct 2012
    Posts
    556
    Post Thanks / Like
    I used same one from an Impala.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor