Visit our community sponsor
Thanks:
0
Likes:
6
-
I have never been a fan of the OEM intercooler since it sits above the intercooler with no fans and no heat shield to protect it. I am currently making my fan shroud but I will be using 2 7.5in spal puller fans. So about 1000CFM being pulled through the intercooler at all time . I am using a 7in thick intercooler core that 20in wide. It fits perfect for a coupe. I made a Heat shield and I rotated my turbo. I have a Vf30 so I had to reseal the turbo housing with RTV after I removed the old gasket.
Heat shield is air ducting covered in Lava wrap.
image4_zpsrz3zj0js.JPEG
image3_zpsroojze8e.JPEG
Intercooler
image2_zpsizb9e84c.JPEG
Not much RTV is required to reseal the turbo. I used High temp copper RTV. Clean the surface very well.
image28_zpszowd4bjc.JPEG
image27_zps0ekffcbe.JPEG
image26_zpsjrx97hwx.JPEG
Last edited by redfogo; 07-14-2017 at 07:26 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor