Interest Check/Group Buy: Steering Rack Extender, Zero Decibel

[Mechie3]

The early chassis have the mounts for the steering rack in the wrong position placing the rack off center. I don't know how many chassis are affected or what chassis number it was fixed at. One of three things could be done:
1: turning radius left/right was different as the stroke left/right was different
2: minimal thread engagement on the tie rod end,
3, make an extension

I made a couple of steering rack extenders (C. Plavan, Bob n Cincy, RM1Sepex, myself) and finally got them quoted at a third party shop so I can actually sell them (vs just giving things away, lol).

Machined from 1018 steel


Here's a picture of an old prototype on Bob's car. I've changed it slight to allow for easier installation.


Group buy pricing, min 5 required to order. 50% deposits due before ordering (only so I don't get stuck with several hundred dollars worth of parts I don't need). note: the price drop between 5 and 10 pieces is rather substantial and tapers off from there. At the 5 piece price it looks like a majority of my cost is just amortizing the setup fee. After that it's more machine time and material.

5-9: $140
10-14: $95
15-20: $77
20+: $64

1: Nismo_RB25
2: Metros
3: Jrach
4: Ethan818
5: Rori
6: Justin
7: Justin
8: Azpete
9: Santiago
10: Santiago