Ted
I had several long conversations with the fellow from Naake specifically about my origional requested 16.5" length. He assured me that with these damping curves I would not bottom these shocks. He also insisted that the 15" length was the perfect shaft travel ratio of compression versus droop with the ride height I gave him. They are the experts so I went with it.

I don't have the motor in yet so I'm a ways off. What was holding me back was the uncertanty of how I was going to fix the front end geometry. I was waiting for the aftermarket upper control arms that never made it to market. Now that I have my tabs moved back 3/4" I can use the Vette UCA's. Then proceed with the rest of the build.

I already have your rear shock mount kit. If you had come out with your sway bar kit a little sooner I would have used your setup. As it was, my frame had been cut and welded when your kit was announced. Oh well.