Visit our community sponsor
Thanks:
46
Likes:
277
-
Got to spend most of the day in the garage.
I bought an ICT alt mount and modified it slightly to fit my alt down low.
Alignment looks good, will know when I get the belt and tensioner pulley next week.
It's easy to adjust if I need to.
Then started working on the supplied FFR tranny mount. Added some steel between the tranny and the mount, drilled a few holes, looks pretty good.
Haven't checked the angle yet, if it's off I can cut the supplied spacers.
Working on the wiring and exhaust will be next.
The BBK headers I bought will not mate up to the FFR front pipes, the angle is wrong, will need to either modify them of make new ones.
Wallace, thanks for the info on Replicaparts. Got his fan shroud today.
DaveS53, bought the DirtyDingo low side A/C mount parts yesterday, thanks for that info.
DSCN1583.JPG
DSCN1584.JPG
DSCN1586.JPG
Last edited by JimLev; 03-30-2018 at 08:51 PM.
Reason: Added info
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor