-
Senior Member
Brandon,
Your second photo shows the UCA on top of the mount tabs. Just in case... it should be between the upper and lower tabs.
BTW stuff on the threads could be previous thread locking compound, maybe a pre-apply. I would clean the threads and use Loctite.
FWIW I find the R & L box sections at the corners of my "S" footwells too big to be effective dead pedals.
Last edited by J R Jones; 08-19-2021 at 10:02 AM.
Reason: addl'
-
Originally Posted by
J R Jones
Your second photo shows the UCA on top of the mount tabs. Just in case... it should be between the upper and lower tabs.
FWIW I find the R & L box sections at the corners of my "S" footwells too big to be effective dead pedals.
Yes, but the R mounts the UCA on top of the tabs and uses a spacer or washer stack to fill the tabs. Then you need to use longer grade 8 bolts for the new required length.
-
Post Thanks / Like - 1 Thanks, 0 Likes