Any one know the make and part number for 33 manual steering rack ?
Visit our community sponsor
Any one know the make and part number for 33 manual steering rack ?
All i ever hear from FFR is "those racks were custom made for us by Unisteer"
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
i understood them to be made in Taiwan specifically for FFR. There is no cross to a mainstream unit but boots are available if you search in the forums hard enough.
Someone told me that this is a Dodge Omni rack. I do not know if that is true or not, That's just what i heard. I looked at Unisteer for Dodge Omni and here's the page ..... https://www.unisteer.com/collections/rack-pinions/omni
If all you need is a boot. Look at Moog K150289
I tried the Moog K150289 as suggested. It fit perfectly on the driver side. of the rack. However, the Bellows on the passengers side is completely different. As I have researched it, the FLA-FR1501-P is the one for the passenger side.
In the picture below we are holding the Moog K150289 in the left hand and the Flaming River FLA-FR1501-P in the right hand. Picture 2 is the passenger side Tie Rod end.
IMG_1828.jpegIMG_1831.jpegIMG_1820.jpegIMG_1815.jpegbig_FR1501.jpg
Last edited by wrp; 04-15-2023 at 10:41 PM.