Jeff33Ford HotRod Build - First Go-Cart

[progmgr1]

Could you share some pics of where you mounted the rear brake line brackets? Where the braided line connects to the hard line?

I have an idea where I want to mount mine, but wanted to see what others with the '15 IRS have done.

Thanks!

20220905_144114.jpg 20220905_144030.jpg

Sorry for the poor photos, but it was too hot to spend much time in the garage today. In any case, I riveted the brake line support brackets to the upper control arm mounting flange. This was a convenient location that allowed the flexible brake lines to move through the full range of travel without interference. The view in the photos is somewhat obscured by additional structure that I added, but I think you can get the idea. If it matters, I have the optional Wilwood brakes on a 2015 IRS in a Gen 1 Hot Rod.

HTH Keith HR #894

[TxMike64]

Sorry for the poor photos, but it was too hot to spend much time in the garage today. In any case, I riveted the brake line support brackets to the upper control arm mounting flange. This was a convenient location that allowed the flexible brake lines to move through the full range of travel without interference. The view in the photos is somewhat obscured by additional structure that I added, but I think you can get the idea. If it matters, I have the optional Wilwood brakes on a 2015 IRS in a Gen 1 Hot Rod.

HTH Keith HR #894

That's helpful, Thanks!