After building and still owning my mk 4, I have now built my dream garage! I have bean dreaming of the type 65 for 15 years or so. keep setting goals and you will suprise yourself! due for delivery mid march, cant wait!!!!
Gen 3 complete kit
3 link
347 stroker
15" FFR halibrands
same color combo guardsman blue/ wimbleton white stripes (to match Cobra)
Curious why you didnt go IRS. I have one here that is IRS 15 inch knock off wheels and everything fits great. No narrowing of a 8.8 The IRS might actually be cheaper in the end.
Mike
Curious why you didnt go IRS. I have one here that is IRS 15 inch knock off wheels and everything fits great. No narrowing of a 8.8 The IRS might actually be cheaper in the end.
Mike
Hi Mike, I had seriously considered pin drive knockoffs. however was concerned about the legal side of it here in NYS. FFR tech confirmed the fitment of their wheels without narowing the rear. actually was told the rear may need spacers
Congrats Luey! I remember your Roadster build. Regarding the rear end…use an SN95 from ‘94-‘98 rather than Fox which is 3/4” narrower per side. I used one on a Gen3 with 10.5” wide 17s and 315s and actually the wheels could have come out a bit further.
Congrats Luey! I remember your Roadster build. Regarding the rear end…use an SN95 from ‘94-‘98 rather than Fox which is 3/4” narrower per side. I used one on a Gen3 with 10.5” wide 17s and 315s and actually the wheels could have come out a bit further.
Looking forward to following along!
Jeff
Thanks Jeff. you helped me quite a bit back in the day! I have ordered the standard width solid axle from Moser (through FFR) same as the MK4. Interesting observation, think Im ok with the Moser rear? im sure I will need spacers
Thanks Jeff. you helped me quite a bit back in the day! I have ordered the standard width solid axle from Moser (through FFR) same as the MK4. Interesting observation, think Im ok with the Moser rear? im sure I will need spacers
Andy
Congrats Luey,
I got the Moser std for a 3 link on my Daytona with 15 in. Hallibrand. No need for spacers here.
Congrats on your next journey! Beautiful garage! We just built a new house with a 4 car garage and plan to have the floors finished or covered and a lift installed in the spring. Also planning a Daytona build in the hopefully not too distant future. What kind of flooring did you install? Any more pics of your layout? GLWTB. I'll be following.
Nate Johnson
Mark I 302 from a 92 Mustang GT 650 CFM Carb 99 GT Solid Axle with 3:27
"If you don't take the time to do it right, you'll make the time to do it over." - Dad
Congrats on your next journey! Beautiful garage! We just built a new house with a 4 car garage and plan to have the floors finished or covered and a lift installed in the spring. Also planning a Daytona build in the hopefully not too distant future. What kind of flooring did you install? Any more pics of your layout? GLWTB. I'll be following.
thank you. the flooring is from race deck. its ok, not what I had expected. the garage is 3.5 car with a great shop off the back as you can see in the pictures before and after I installed the french doors to the back shop. just under 1000 sqft of shop space now