![BluePrint Engines](https://www.factoryfive.com/wp-content/uploads/2015/12/BluePrint_Engines_Factory_Five_banner_ad_revised.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
0
-
Senior Member
Leaking master cylinder?
![](http://i100.photobucket.com/albums/m35/mxmetros6/818%20Build%20Album/20160724_110922_zpsuhpayhu3.jpg)
You can just faintly see a small leak coming from the bottom of the master cylinder. I've tracked this leak to the actual master cylinder. Above this area all fittings/junctions are tight and dry. When installing the master I used Mike Everson's bracket to level it out. That negated the metal gasket that came with the kit - or so I thought. Do I need to create a new gasket for the different bracket/master or is the actual master leaking?
Any recommendations for least messy way to remove & replace the master?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Martin's Dent and Collision Shop](https://www.factoryfive.com/wp-content/uploads/2019/02/martins-dent-shop.jpg)
Visit our community sponsor