RoRi's Custom Parts - K-Tuned Shift Arm and Cable Bracket

[rori]

Shift Rod Arm for use with Very Cool Parts K-tuned shifter assembly. Provides additional clearance at the rear of the vehicle where many people are reporting that the stock hardware is hitting the bodywork. Optional cable bracket is not required, but it corrects the geometry so that the cable is mounted in parallel with the shift rod for the most efficient operation.

SOLD OUT





This is how much space is saved over the stock hardware (approx. 40mm):



This is how the FFR supplied bracket is modified after cutting it down for the K-tuned shifter cables and moving it forward for the aluminum shift arm:



This is the bracket that I came up with:



Mounted with the supplied bracket from Waynes K-tuned kit:

[Mechie3]

Big difference with your bracket!

[C.Plavan]

First hand experience. I bought the bracket and shift arm. Great parts and Rori answered question quickly.

[AZPete]

X2 - fits perfectly, works well. It will also look cool as seen through the rear mesh. Thanks rori.

[rori]

emachineshop featured my shift arm on their Facebook page:

https://www.facebook.com/photo.php?f...1572475&type=1

[rori]

10 more shift arms arrived today, ready to ship.

[rori]

Only 4 left. This will be the last of them most likely.