Plumbing hydroboost and power steering, going by previous post with all fittings listed.
wondering if anyone has ever used a banjo bolt to an-6 off of power steering pump?
if so what fitting?
PowerSteeringLineMap.jpg
Visit our community sponsor
Plumbing hydroboost and power steering, going by previous post with all fittings listed.
wondering if anyone has ever used a banjo bolt to an-6 off of power steering pump?
if so what fitting?
PowerSteeringLineMap.jpg
I just did it, but first call your PS pump supplier and see if they have the fittings you need.
I have the Frontrunner Drive system and the pump comes with the 6AN banjo fitting outlet Vintage Air part# 852011: http://www.vintageair.com/Instructions2013/904097.pdf. I busted the internal threaded aluminum fitting (weak point) and replaced that part with Detroit Speed's part, keeping the Vintage Air part with the 6AN fitting. Combined the two; worked well...just finished today...no leaks.
http://www.detroitspeed.com/Steering...e-fitting.html Of the Detroit Speed parts, I only used the crush washers and the threaded piece at top right (the VA part that I broke (over torqued...my fault).
SOLD 03/2013: MK II #5004: 5.0 EFI: 8.8, 3.55, E303, TW heads, GT40 intake, 24#, 70mm MAF
Ordered MK IV Coyote Complete Kit.