Bump steer

[FFRSpec72]

What method do you use to adjust the front bump steer? Are you adjusting the rack height through shims/bushings or spacing the tie rod end at the steering arm? If you are adjusting the tie rod end at the steering arm, did you replace the end links with rod ends? Thanks for your insight!

Adjusting the steering arm, you will need to replace the rod ends, adjusters/sleeves and stud/shaft, I have documented the parts that I used in this tread.

[fastzrex]

Thanks for the info! Are you referencing your build thread for the bump steer components?

Adjusting the steering arm, you will need to replace the rod ends, adjusters/sleeves and stud/shaft, I have documented the parts that I used in this tread.

[fastzrex]

Tony, thanks for your work in finding these parts and process. I found the following in your build thread and posting again so I can find them in the future and for other's reference:

Here are the parts I sourced out to get a bump steer kit that would work, height wise and adjustable

http://www.speedwaymotors.com/Adjust...=91636055PINTO
http://www.speedwaymotors.com/Search...+Inch+x+1+Inch
http://www.racecraft.com/index.php?m...result&search_ in_description=0&keyword=RC21083&x=21&y=8
http://steinjager.com/shop/index.php...earch=J0041201

Adjusting the steering arm, you will need to replace the rod ends, adjusters/sleeves and stud/shaft, I have documented the parts that I used in this tread.

[frankc5r]

Tony, thanks for your work in finding these parts and process. I found the following in your build thread and posting again so I can find them in the future and for other's reference:

Here are the parts I sourced out to get a bump steer kit that would work, height wise and adjustable

http://www.speedwaymotors.com/Adjust...=91636055PINTO
http://www.speedwaymotors.com/Search...+Inch+x+1+Inch
http://www.racecraft.com/index.php?m...result&search_ in_description=0&keyword=RC21083&x=21&y=8
http://steinjager.com/shop/index.php...earch=J0041201

Could not get the links to work.

[FFRSpec72]

Could not get the links to work.

The links in my original post #661 work, http://thefactoryfiveforum.com/showt...attle-WA/page3

[fastzrex]

Yep, I screwed up, copied the text rather than the actual underlying link address; and then did not test. I will do better next time!

Tony, thanks for your work in finding these parts and process. I found the following in your build thread and posting again so I can find them in the future and for other's reference:

Here are the parts I sourced out to get a bump steer kit that would work, height wise and adjustable

http://www.speedwaymotors.com/Adjust...=91636055PINTO
http://www.speedwaymotors.com/Search...+Inch+x+1+Inch
http://www.racecraft.com/index.php?m...result&search_ in_description=0&keyword=RC21083&x=21&y=8
http://steinjager.com/shop/index.php...earch=J0041201