Using a stroked 351 Windsor and looking for recommendations on the appropriate oil pan and pickup. I was considering the Canton Street/Strip Pan Kit 70651??
Visit our community sponsor
Using a stroked 351 Windsor and looking for recommendations on the appropriate oil pan and pickup. I was considering the Canton Street/Strip Pan Kit 70651??
MK4 #9121 - Complete kit - Stroked 351, T5x, 3.55 Rear End, 3-Link - Pickup 6/17/17, 1st start 12/2/17, Go-Kart 12/9/17, Road Worthy 4/27/18
I have a very nice road race oil pan that sit above the bottom if the frame.
99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
Sponsor Tony B's 2007 ST2 National Championship
2009 NASA TTC runner up-2010 NASA TTB runner up
Can you provide more details?
MK4 #9121 - Complete kit - Stroked 351, T5x, 3.55 Rear End, 3-Link - Pickup 6/17/17, 1st start 12/2/17, Go-Kart 12/9/17, Road Worthy 4/27/18
7qt, 7.25" deep, fully baffled with windage tray and comes with pick up and dip stick, $375
99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
Sponsor Tony B's 2007 ST2 National Championship
2009 NASA TTC runner up-2010 NASA TTB runner up
We use Canton 15-610 front sump on the 306/347 (Ford block) and 15-680 front sump on our 427 (Dart block). I can't personally verify that they work in the roadster yet, but FFR specified these for the engine a builds and I haven't heard of any customers having issues with them.
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
I put a canton 15-694 on my car. It's clearenced for a stroker
MK4 Roadster # 8548, Ford Performance X427, TKO 600, 8.8 3 Link, Paint by Jeff Miller, Suspension setup by Frank Maslowski I.E.427
I would highly recommend Gordon's pan. If you read through old threads you'll see numerous discussion on oil leaks with various pans. His pan (made by Champ Pans) fits perfect and doesn't leak a drop. It's also priced fairly.
Bob
Mk IV Roadster, 347/516 HP, 8 stack injection, Holley HP ECU, Astro Performance T5, 3-Link 4.10 gears, A/C, PS, PB Purchased 08/2015, Graduated 02/2017