Boig CoolTubes fitment

[kcarlasc]

Anyone running the Boig Cooltubes on a newer version 818. I spoke with Boig and they where helpful and was able to get some of it worked out.

But on the drivers side connection at the bottom of the radiator I just can’t get the fitment right. The pipe hits the frame, does not line up with the radiator well and also hits in the back on the mount where the control arm bolts in. If I let it the way it lays it hits the rack boot pretty badly. Right now I have it suspended with wire ties. See attached

B12F1F2E-99EF-417B-8B17-4C2941267678.jpeg
73660AA5-91B4-45A9-8181-BC4B39C51AB4.jpeg
5B692EC5-B7D6-4A7A-8ED5-4FD01B6D4079.jpeg