-
Engine is shipping!
Got my shipment notification from Blueprint Engines today, as well as my dyno report. Seems to be an extremely flat curve for both the torque and HP.
494.6HP @ 5800
490.3TQ @ 4700
Wish I didn't have this whole project in front of me because that's a lot of work before I get to enjoy this beast!
427W Dyno Report.jpg
Last edited by Saleen9165; 09-25-2018 at 08:32 PM.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Originally Posted by
Saleen9165
Got my shipment notification from Blueprint Engines today, as well as my dyno report. Seems to be an extremely flat curve for both the torque and HP.
494.6HP @ 5800
490.3TQ @ 4700
Wish I didn't have this whole project in front of me because that's a lot of work before I get to enjoy this beast!
Congrats! You will be very happy with your BluePrint purchase. They have been great to work with and are there when you need them with outstanding customer service.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Going to be a monster!
Chris
Generation 3 Type 65 Daytona Coupe Complete Kit #151885 received May 6, 2022. Gen 3 Coyote, IRS, Tremec TKX, American Powertrain hydraulic throwout bearing & Wilwood brakes.
MK4 Basic Kit #7404, 347 EFI - Pro M Racing ECM, 30# injectors, 70 mm throttle body, 80 mm MAF, Edelbrock Performer aluminum heads & RPM II intake, all new G-Force T5, 3:55 gears, Pro 5.0 shifter, 3-link, carbon fiber dash/custom Speedhut gauges and paint by Da Bat.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
Saleen9165
Got my shipment notification from Blueprint Engines today, as well as my dyno report. Seems to be an extremely flat curve for both the torque and HP.
494.6HP @ 5800
490.3TQ @ 4700
Wish I didn't have this whole project in front of me because that's a lot of work before I get to enjoy this beast!
427W Dyno Report.jpg
I have heard it said that men are destination oriented and women are journey oriented. My experience was that the build was just as satisfying as the completion. Take your time and enjoy the journey, you will look back on it with pride.
Mark IV -- 04 Mach1 Donor -- 4.6 DOHC -- TKO 600 -- 3:55 Gears -- 3 Link - Hydroboost PS & PB -- 13" PBR's Front & 11.65's Rear -- Cuesta Wiring -- Thompson Signals -- FFR Radiator, heater, wipers, and catalytic converters -- Metco DS safety loop -- Forte 7/8" front bar -- VPM 3/4" rear bar -- Champ road race pan -- Corbeau A4 Seats -- Nitto NT-05's on 17 x 9's.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
I can smell the tires burning already
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Curious, when did you place your order at BluePrint Engines?
-
What motor did you order?
-
Senior Member
Congrats!!
My Blueprint 427 is in and will likely be first start tomorrow morning.
I went carb and have about the same numbers. 501 hp and 493 lb-ft of torque.
It's a beautiful engine and when you pop the top off that crate the smile will be ear to ear!
Steve
2nd MK4 #10639 received 3-19-23. Wife's version. Street Snake - IRS, Willwoods, no roll bars, no hood scoop, no stripes, Blue Print EFI 306 with AOD trans, and under car exhaust. Ford Eruption Green with saddle leather interior.
1st build - Mk4 Roadster #9319, received 4-10-18. IL registration 8/6/19. Moser 8.8. 3 Link. Wilwood brakes. Blue Print 427, Holley 750, TKO 600, 0.64 OD. Paint Dec 2020. Ruby Red with Carbon Flash Black metallic stripes.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
Saleen9165
Got my shipment notification from Blueprint Engines today, as well as my dyno report. Seems to be an extremely flat curve for both the torque and HP.
494.6HP @ 5800
490.3TQ @ 4700
Wish I didn't have this whole project in front of me because that's a lot of work before I get to enjoy this beast!
427W Dyno Report.jpg
Here's a taste of what's in your future!
https://www.youtube.com/watch?v=fkafRL2NoLc
https://www.youtube.com/watch?v=bO6pbgtTRR0
Awesome piece of machinery!
Steve
2nd MK4 #10639 received 3-19-23. Wife's version. Street Snake - IRS, Willwoods, no roll bars, no hood scoop, no stripes, Blue Print EFI 306 with AOD trans, and under car exhaust. Ford Eruption Green with saddle leather interior.
1st build - Mk4 Roadster #9319, received 4-10-18. IL registration 8/6/19. Moser 8.8. 3 Link. Wilwood brakes. Blue Print 427, Holley 750, TKO 600, 0.64 OD. Paint Dec 2020. Ruby Red with Carbon Flash Black metallic stripes.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
You will be a happy guy. Blueprint gives great service after the sale. I got the Holley Sniper EFI and had several questions and they were right there.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Thanks again for all the positive feedback guys! anything we can do let us know!!
[email protected]
-
Congratulations on the great dyno numbers; I think you will be buying lots of rear tires!
I will add my voice to the BluePrint is awesome chorus. Great products, great service, and super people to help you!
Good luck as you move forward, and enjoy the process. I think you will find it rewarding and satisfying!
Regards,
Steve
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Originally Posted by
Yama-Bro
I can smell the tires burning already
Man Frank, look at all these 427's... I think you need to follow suit!