Have not liked the tilt of engine toward front causing oiling issues. Already have engine mounted and all
accessories. Thus did not want to redo engine mounts.
Hobby Racer did a nice writeup and I did similar with my mount being slightly different.
Used 80A liquid urethane with activator.
Pictures attached:

Mold I made using cardboard and hot glue. Tack welded plate added to hold 2 parts together.



Mold laying in sand to catch any leaky liquid rubber.


Mount after rubber poured in. Cures overnight.



Finished mount almost one inch lower than stock. Makes big change level.



What the stock mount looks like after being cut in half.

Big thanks to Hobby Racer for the idea.