Purchased the recommended Fuel Pump (255 lph Walbro & Harness) for in-tank installation.

https://www.rallysportdirect.com/par...yABEgIJLfD_BwE

The problem I'm having is getting the unit to fit into the tank and seated properly. Two things seem to be impeding the process. 1) the filter on the intake is positioned at a 90 degree angle from the pump/harness and 2) there is a metal divider inside the fuel tank.

The in-tank divider is hitting the filter in a way that prevents the whole unit to sit cleanly.

Any thoughts would be appreciated.