Am I forgetting something that goes here on the driver's side? Or can I fabricate an airbox to put here? Thanks!
Dave
Visit our community sponsor
Am I forgetting something that goes here on the driver's side? Or can I fabricate an airbox to put here? Thanks!
Dave
MK3.1 2004 Mach 1 donor. ABS, PS, TC.
GTM #304 LPE 525hp LS3
2000 C5 Lingenfelter LS1@489hp
1999 Corvette FRC/Z06 track car
nothing really goes there. I mounted my fuel pump there. the hood hinge goes on the roll bar
Cool, thanks!
MK3.1 2004 Mach 1 donor. ABS, PS, TC.
GTM #304 LPE 525hp LS3
2000 C5 Lingenfelter LS1@489hp
1999 Corvette FRC/Z06 track car
On most of the cars we do, we end up mounting the coolant reservoir (the stock 'Vette reservoir or the Canton direct-fit replacment) above the fuel tank there which takes up a good deal of that room......and then we do end up running the cold air intake over there on most cars. On other cars that we run the cold air intake to the passenger side, a lot of times we'll mount the rear Infinitybox powercell there.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts
for me cold air intake.
what is the big tube out of you fuel tank?
I put my fuel pump, regulator, controller and fuel filters there also the factory cold air intake (if you bought it) has to snake through there.
That's my new fuel filler, sealed up the crossover tube filler location since it kinked against the body and I wanted to move the filler location on the body as well.
https://thefactoryfiveforum.com/show...l=1#post347062
MK3.1 2004 Mach 1 donor. ABS, PS, TC.
GTM #304 LPE 525hp LS3
2000 C5 Lingenfelter LS1@489hp
1999 Corvette FRC/Z06 track car
Mine is full of dust and dirt right now.
Custom LCD Gauges , Data Loggers, Control Touch Screens
www.LCDdash.com \\ 647-522-9953 \\ Voice & Text
Proud new owner of GTM Gen 1., #105 - 08/27/11
LQ9 Powered, G96.00 6 speed transaxle