-
WTB cobra 289 / MK4 parts
1. ignition switch with keys
2. turning switch
3. wiper switch
4. power steering rack
5. power steering lines (rack to pump)
6. power steering pump (302 engine)
7. upper water hose (radiator to pump)
8. front turning signal light
9. windshiled asembly #10611
10. rear view mirror #10613
11. lock set #11019
12. sun visor #12042
13. headlight switch #12354
14. wind wing #12049
15. heater switch
16. horn button #11053
17. #10817 - BLUE INDICATOR LIGHT
18. #16007 gagues set with GPS
19. #14227 - FORD STYLE EFI HARNESS
20. WILWOOD 12" FRONT & 12.19" REAR BRAKE KIT (RED)
21. #14865 - 17" X 9" AND 17" X 10.5" VINTAGE HALIBRAND REPLICA WHEELS
-
Senior Member
wow. looking for quite a bit of things. what are you starting with?
I have a factory corrugated metal radiator hoses if you'd like with couplers. you'll need new hose clamps though.
make me an offer.
-
A bought cobra after burn.
Some parts buy in FFR factory.
Please let me see this metal radiator hoses. Is this universal hose?
thank you!
https://www.copart.com/lot/54285769/...salt-lake-city
-
Senior Member
yikes! looks like a sizable project.
here's a pic of the hose that I have.
https://www.google.com/url?sa=i&url=...AAAAAdAAAAABAH
it's the corrugated hose going from the water neck to the radiator. this isn't my car, just a pic I found online. The kit comes with enough for upper and lower hoses.
FF charges $170 for the part, which is crazy expensive. Make me a reasonable offer and I'll ship it out.
http://www.factoryfiveparts.com/1388...ator-hose-kit/
I'm assuming you'll need to get a new 289 body from FFR, right? 289s are pretty rare, and it'll be hard to find a front clip from someone who just had rear end damage. the MK4 front/rear clips are hard enough to find out there from a salvage.
FFR has most of the stuff you're looking for. Are the wheels salvagable? the pic doesn't make them look like they're too bad of shape.
I doubt you'll find someone w/ an extra set of gauges sitting around. The ones on your car are from Speedhut. you can customize them as well on their website which is nice.
good luck with the rebuild. I'll be interested in watching your progress if you end up starting a thread on the restoration.
-
Administrator
Can we see the chassis? How much (if any) was exposed to heat?
FFR 5369 Pin Drive, IRS, Trigos, Torsen, Wilwoods, FMS BOSS 302 "B" cam , Mass-flo. CA SB100 (SPCN) Registered
Delivered 4/23/06. "Finished" 4/2012 (still not done!)
-
Looks like it started under the dash. Motor hardly looks touched..
-
Senior Member
I would call FFR and see if the can bundle a deal for you possibly
-
Do you need this stuff shipped to POLAND?
Originally Posted by
arek900
1. ignition switch with keys
2. turning switch
3. wiper switch
4. power steering rack
5. power steering lines (rack to pump)
6. power steering pump (302 engine)
7. upper water hose (radiator to pump)
8. front turning signal light
9. windshiled asembly #10611
10. rear view mirror #10613
11. lock set #11019
12. sun visor #12042
13. headlight switch #12354
14. wind wing #12049
15. heater switch
16. horn button #11053
17. #10817 - BLUE INDICATOR LIGHT
18. #16007 gagues set with GPS
19. #14227 - FORD STYLE EFI HARNESS
20. WILWOOD 12" FRONT & 12.19" REAR BRAKE KIT (RED)
21. #14865 - 17" X 9" AND 17" X 10.5" VINTAGE HALIBRAND REPLICA WHEELS
-
-
Originally Posted by
FFinisher
Do you need this stuff shipped to POLAND?
Does not have to be.
My cousin lives in CT and do it to me package to Poland.
But if you can shipped to Poland will be perfect.
-
Originally Posted by
bil1024
I would call FFR and see if the can bundle a deal for you possibly
I am in touch with FFR, but not all parts in stock.
-
Originally Posted by
egchewy79
yikes! looks like a sizable project.
here's a pic of the hose that I have.
https://www.google.com/url?sa=i&url=...AAAAAdAAAAABAH
it's the corrugated hose going from the water neck to the radiator. this isn't my car, just a pic I found online. The kit comes with enough for upper and lower hoses.
FF charges $170 for the part, which is crazy expensive. Make me a reasonable offer and I'll ship it out.
http://www.factoryfiveparts.com/1388...ator-hose-kit/
I'm assuming you'll need to get a new 289 body from FFR, right? 289s are pretty rare, and it'll be hard to find a front clip from someone who just had rear end damage. the MK4 front/rear clips are hard enough to find out there from a salvage.
FFR has most of the stuff you're looking for. Are the wheels salvagable? the pic doesn't make them look like they're too bad of shape.
I doubt you'll find someone w/ an extra set of gauges sitting around. The ones on your car are from Speedhut. you can customize them as well on their website which is nice.
good luck with the rebuild. I'll be interested in watching your progress if you end up starting a thread on the restoration.
My cousin last week pickup parts from FFR factory, front body 289.
wheels look very good, but I would like to have wilwood brakes, then I need 17' wheels.
In my 289 are 15' and small brakes.
I back to you with hose.
Thank you!!
There is my second project. Firstone MK4 I just finish, too bought in copart and repaint to blue .
now looks that:
-
Post Thanks / Like - 0 Thanks, 1 Likes
GWL liked this post
-
Senior Member
Interesting... 289 body yet MKIV rollbar. Chassis number is not too far off of mine.
FFR #8833 289 FIA 3-link
1965 289, TKO600 from Forte's Parts Connection
Body and Paint by Mike's Auto Restoration
Picked up 3/5/2016, First start 4/22/2017, MA legal 7/11/2018
Build Thread
http://thefactoryfiveforum.com/showt...FIA-build-8833
"Insanity is contagious" - Joseph Heller
-
Senior Member
You do some good work. What's a roadster sell for in Poland?
-
Originally Posted by
egchewy79
You do some good work. What's a roadster sell for in Poland?
Thank you!.
It's not for sale .
Collection
-
I do forged carbon fiber dash, (like Lambo Huracan performante).
I need to do new thread about my first MK4 repair time.
the forged carbon looks amazing in rays of the sun
-
Post Thanks / Like - 0 Thanks, 1 Likes
GWL liked this post
-
Originally Posted by
arek900
I do forged carbon fiber dash, (like Lambo Huracan performante).
I need to do new thread about my first MK4 repair time.
the forged carbon looks amazing in rays of the sun
I bet if you started making those with no precut holes and no glove box you could sell them pretty well. Maybe regular carbon fiber rather than forged but I bet either would sell well. The only FFR option comes with the glove box formed already
-
Originally Posted by
Hoooper
I bet if you started making those with no precut holes and no glove box you could sell them pretty well. Maybe regular carbon fiber rather than forged but I bet either would sell well. The only FFR option comes with the glove box formed already
I am from Poland, shipping dash to USA is very expensive
-
Originally Posted by
arek900
I am from Poland, shipping dash to USA is very expensive
I sent you a PM and have several items on your list and more.
George
-
Senior Member
My Wilwood brakes are different than FFR, a bit larger. Message me if you would be interested.
99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
Sponsor Tony B's 2007 ST2 National Championship
2009 NASA TTC runner up-2010 NASA TTB runner up