-
Fordman114's MKIV Build Project
I finally took the plunge and ordered my roadster retirement project. I have built 4 street rods over the years starting in 1985 with a 1954 Ford F100 pickup. I then built a 1931 Ford Model A chopped top coupe. I wanted to build a Cobra at that time, but could not afford the outlay of cash to purchase a kit.
Well now things are different, I will be retiring on Dec. 31st , so I will have plenty of time on my hands. I ordered a complete kit at the end of August and have a build date of March 5, 2022.
It seems like an eternity before it will be delivered, but it gives me time to get the shop in order. Need to find a temporary home for one of my street rods. I have a a four car garage, 2 cars wide and 2 cars deep with a small entertainment area in front of one stall. It will be pretty cramped with two cars and the project at the same time.
I already have my engine/transmission combo and a complete IRS from a 2019 Mustang GT.
My Build:
Complete MK IV Kit
Powdercoated chassis
Gen 3 Coyote engine
MT82 6 speed transmission
Formacars MT82 shifter conversion kit
Coyote full length headers
Hydraulic clutch master cylinder kit
31 Spline 2015 IRS driveshaft
Body Cut-outs
Vinyl seats-will re-upholster with ultra leather
Coyote power steering w/compete kit
Front lower arms-standard width
2015 IRS Kit
FFR GPS Gauge set
17x9/10.5 Halibrand replica wheels
Stainless bumper kit
Wind wings
Front and rear swaybars
Brake duct mesh
Chrome Drivers and passengers roll bars
Assembled side louver set
Center dash support
Trunk gas struts
Gen 3 coyote installation kit
Manual driveshaft adapter
Carbonfiber dash with glovebox
Gas-N stainless touring sidepipes
I'm new at posting a thread, so bare with me while I learn how to post pics
-
Post Thanks / Like - 0 Thanks, 3 Likes
-
Senior Member
FFR Roadster Delivered 9/16/21
Forte 427 Fuel Injected with TKX Transmission
Forte's Axle
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Welcome and congratulations. If you're planning a Ford Performance control pack for that Gen 3 Coyote, suggest you may want to order that now too. They're apparently in very short supply and potentially some months from delivery. Haven't heard this confirmed, but have to believe it's related to the microchip shortage. Guaranteed Ford is putting every PCM they can get into production vehicles. Not the aftermarket.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Originally Posted by
edwardb
Welcome and congratulations. If you're planning a Ford Performance control pack for that Gen 3 Coyote, suggest you may want to order that now too. They're apparently in very short supply and potentially some months from delivery. Haven't heard this confirmed, but have to believe it's related to the microchip shortage. Guaranteed Ford is putting every PCM they can get into production vehicles. Not the aftermarket.
Thanks, Yes I already have the control pack on order. I have no idea when it will be in stock, I'm not holding my breath. I agree they are not going to let any of them out to Ford Performance until they satisfy there own shortage.
-
Getting impatient waiting for my build date to arrive. I have been using this time to build my chassis dolly and body buck. I have also ordered and received additional parts. I have my NITTO tires, I have heard stories of huge price increases on tires on the horizon so I wasn't going to wait too long to get them. It took over a month to get them anyway. I have my fuel pump and pressure regulator for the Coyote, both from Breeze. Also received my radiator shroud and forward battery mount.
Will be retiring on Dec. 31st, I can imagine how slow the time will pass once I am not working and still waiting for my March 5th build date.
-
MK4 #10328 - complete kit - Gen 3 Coyote, 6 speed, IRS - ordered 9/9/2021, Built 3/5/2022, Delivered 3/23/2022, Completed build 2/1/2023
-
Senior Member
Considering you had a 3/5 delivery date, I'm impressed. I'm doing a similar build, but am impatiently waiting until my July something delivery. Probably going to take me a year to make the progress you've already made.
-
Senior Member
You're cruising right along! And, a belated congrats on your retirement!
P.S. it's probably a bit early to think about it, but if you don't like the Gen 3 cover, Forte offers a Gen 1 cover kit. I would've had to buy a cover anyway, so I opted for the Gen 1 cover. Here is a link with some pictures: https://thefactoryfiveforum.com/show...l=1#post439815
Chris
Coupe complete kit delivered: 4/22/24.
Build Thread. Coyote. T-56. IRS w/3.55. Wilwoods. PS. HVAC. Side windows.
MK4 Complete kit.
Build Thread Index. Delivered: 10/15/2020. Legal: 7/25/23. Coyote Gen3. TKO600 (0.64 OD). IRS w/3.55. PS. Wilwoods. Sway bars. This build is dedicated to my son, Benjamin.
Build Thread.
-
Originally Posted by
460.465USMC
You're cruising right along! And, a belated congrats on your retirement!
P.S. it's probably a bit early to think about it, but if you don't like the Gen 3 cover, Forte offers a Gen 1 cover kit. I would've had to buy a cover anyway, so I opted for the Gen 1 cover. Here is a link with some pictures:
https://thefactoryfiveforum.com/show...l=1#post439815
I have fabricated my own with the center section of the factory GEN 3 as a starting point. I add my own wings to cover up the valve covers, they will be painted to match the body and "COYOTE" accent badges installed
E41981EA-882E-4649-9373-221F0BC8BA0A.jpeg
MK4 #10328 - complete kit - Gen 3 Coyote, 6 speed, IRS - ordered 9/9/2021, Built 3/5/2022, Delivered 3/23/2022, Completed build 2/1/2023
-
Still waiting on POL parts to arrive. In the mean time I have been doing bodywork, wiring, and preparing for upholstery. I have been working on making patterns for upholstery. I have decided to do most of the interior in black leather with some body color accents. I won't explain the accents until I reveal the finished product.28BEAEE8-1F0B-42BE-BA78-63490839C5E0.jpg
MK4 #10328 - complete kit - Gen 3 Coyote, 6 speed, IRS - ordered 9/9/2021, Built 3/5/2022, Delivered 3/23/2022, Completed build 2/1/2023