![Forte's](https://www.factoryfive.com/wp-content/uploads/2015/04/fortes.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
256
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
574
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
japollon
Dave, great looking work. I'm right behind you by a couple of days. Please continue to post pictures! They are so helpful. Where did you get the gravel guard--part number and source? Joel
Joel,
I got an 8-foot length along with my line and a ton of fittings (most I'll never use) from Amazon.
https://www.amazon.com/Copper-Nickel...6+gravel+guard
However, if you just search for "3/16 gravel guard" on Amazon, there are lots of offerings in different lengths.
I just finished up the front lines (pictures later) and had about 3' of line left over from my 25' roll. I have a bleeder on its way and will get the master cylinders bench bled, then bleed the system and check for leaks; fingers crossed!
Dave
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Martin's Dent and Collision Shop](https://www.factoryfive.com/wp-content/uploads/2019/02/martins-dent-shop.jpg)
Visit our community sponsor