-
818R Track/Race car
Factory Five 818R Track/Race car, Chassis 145 delivered August 2014 completed August 2016. This car is well sorted, quick and big fun to drive. I built the car to be dependable, light, and easy to work on and easy on consumables.
Specs:
• Black power coated chassis
• Stock 2.0L EJ205 with VF37 JDM twin scoll turbo, JDM EL header, 1000cc injectors, Cobb Boost controller, Killer Bee wet sump, OCV and pick-up, ArcTangent Design Oil Control Plate, Crawford AOS. 2 mild tunes 256whp and 285whp on pump gas Tuned by Corbin Johnson. STi TMIC with relocated IAT sensor, TGV Delete, 9.5lb ACT Flywheel and Clutch Disc OEM Pressure Plate and T/O bearing.
• Iwire harness, 2004 WRX ECU, AIM MXL dash, 10lb Fire system, 15gallon ATL fuel cell, 6 Point harness, removable steering wheel (Momo)
• AP Brakes front and rear, Wilwood pedal box.
• 2004 WRX 5 speed, Cusco 1.5 RS Limited Slip
• 2004 WRX Donor, Aluminum LCA, All hubs received new bearings when the car was built.
• 17X8 TSW Front Wheels Enkie 18X9.5 TS9 Rear Wheels, BFG R1S tires
• Adjustable front swaybar's .065, .095 and .120 wall .75 4130.
• MR2 shifter with Zero DB shift linkage
• Car Scales at 1850lb W/O Driver.
• Body is polished red Gelcoat.
• Build thread https://thefactoryfiveforum.com/show...ct-has-arrived and some on-track video here https://youtu.be/JAVexNcZmBE https://thefactoryfiveforum.com/show...Open-Track-Day
SOLD
Mitch Wright [email protected]
September 15 2018-105 T13 2.jpg818 3-4 front LS.jpg3-4 front.jpg3-4 rear 818.jpg
More photos available on request.
Last edited by Mitch Wright; 04-28-2019 at 10:46 AM.
-
"Good Judgement comes from Experience. Experience comes from Bad Judgement"
Owner: Colonel Red Racing
eBAy Store:
http://stores.ebay.com/colonelredracing
818R ICSCC SPM
2005 Subaru STI Race Car ICSCC ST and SPM
Palatov DP4 - ICSCC Sports Racer
-
Senior Member
Hey Mitch,
This caught me totally off guard. I know how good your car is and know you have a lot into it. This will be a great deal for someone.
Bob
-
...
-
Man I hope some of these are for sale when Im ready to buy next year.
If in doubt......flat out-Colin McRae
Coupe #485
-
Thanks guys, not in a hurry and really torn. I have another project that I am working on and the extra space and money would speed up completion. So thought I would put it out there.
Other wise I have a few things I want to do to the car over the winter and play with it again in the spring. It is really fun to drive by cars that cost 4-6 time the 818.
FYI I also have new spare front fenders, Facia, and headlights.
-
Moonlight Performance
So surprised to see this!!! Good luck with sale. Someone is going to get a heck of a deal.
What's next?
-
emailed you Mitch. Very interested.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Thanks for your interest Treed and Magnum, let me know if you need any additional information or photos.
-
Last edited by Mitch Wright; 11-19-2018 at 10:13 AM.
-
Senior Member
Wow, I just saw you put this up on BaT. Sorry to see you go Mitch, but GLWTS!
https://bringatrailer.com/listing/20...y-five-818r-2/
-
I am not going anywhere Hobby, First the car has to sell for what it is worth to me. If it doesn’t sell I have my track activity planned. The car is too much fun not to play with it.
I also have another project in the pipeline.
-
Car is currently being prepared for the upcoming season. One change being made is opening up the front fender flairs to allow more clearance 235/40X17 front tires. I have run a 235 front 265 rear set up but front fender clearance was an issue. Once I have the fenders done I will post some updated photos.
-
Bump
In the NCM booth at the Louisville Auto Show this weekend. Hurry up spring06452094-299B-4D16-B6A3-C232CA9CCC1D.jpg
-
My 818R has SOLD. The car heads to the new owner tomorrow, I am already feeling separation anxiety and sad to see it go. But on to finish my Ecoboosted Falcon and starting to think about my next FFR build.