February 2023 POM Winner!ModelRoadsterFFR NumberF5R1008249RDDescription of SettingDriveway of Horse Farm near me and parking lot of marketing companyLocationCedar Hill, MO and Webster Groves, MOPicture Uploads
Visit our community sponsor
February 2023 POM Winner!ModelRoadsterFFR NumberF5R1008249RDDescription of SettingDriveway of Horse Farm near me and parking lot of marketing companyLocationCedar Hill, MO and Webster Groves, MOPicture Uploads
Congratulations! You are the February 2023 POM Winner!
FFR 5369 Pin Drive, IRS, Trigos, Torsen, Wilwoods, FMS BOSS 302 "B" cam , Mass-flo. CA SB100 (SPCN) Registered
Delivered 4/23/06. "Finished" 4/2012 (still not done!)
Thank you. This is my second car and I've learned so much from building this and learning little features and tricks from other members here and in the St. Louis Gateway Cobra Club. We have around 45-50 members. While driving my old MKII car, I was always looking at other cars, especially in our club and adding a checklist of features I wanted to include on my next build. Thanks to all members here for the support and guidance. I'd also like to thanks a couple of nice friends who helped bring my vision of the body and paint to life, Tony Glover and Shane Henson
Last edited by TBull; 02-10-2023 at 02:56 PM.
FFR #4402 MKII Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes, Purchase 8/22/2008 Sold 12/04/2018
FFR #8249 MK IV "Milano" Kit purchased 10/5/2018 - In-Process with 3.27 IRS, Multiport, Fuel Injected Supercharged 347 Big bore with Coil On Plug running Holley HP engine management, 576 RWHP, 510 Torque
https://thefactoryfiveforum.com/showthread.php?29980 Milano thread
BEAUTIFUL car and unique color combination. Excellent work! I'll be trolling your build thread for ideas...
Beautiful! You would be very welcome in Bronco country.
My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
(Most viewed Roadster build thread on this forum!)
Delivered: 6/17/2017
First Start: 12/30/2017
Completed: 12/7/2019
Legal: 1/30/2020
Member of the Mile-Hi Cobra Club
Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread
Super Job!
I am a big Florida Gator fan and love that color combo!
16+ FFR kits and counting!
TBull- Very well done!
Can you tell me about your wheel and tire setup, please? Specifically, the wheel and tire dimensions and where you sourced the FR wheels. Thanks!
Wes, I bought the tire kit off of LMR with 315 rears and 275 front Nitto G2 Tires
https://lmr.com/item/WTK-N1007UBS/19...Wheel-Tire-Kit
I built the car with this tire setup in mind. I have a set of Halibrands I plan to use for the track and I planned on the front being 275s, so I bought the FFMetal Fat Tire front "F" panel kit as well. With sway bars front and rear and an aggressive street alignment, the car handles like a dream. To complete the look, I bought a Nitto tire sticker kit off Etsy for the the billboard look.
FFR #4402 MKII Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes, Purchase 8/22/2008 Sold 12/04/2018
FFR #8249 MK IV "Milano" Kit purchased 10/5/2018 - In-Process with 3.27 IRS, Multiport, Fuel Injected Supercharged 347 Big bore with Coil On Plug running Holley HP engine management, 576 RWHP, 510 Torque
https://thefactoryfiveforum.com/showthread.php?29980 Milano thread
beautiful. What headlight lamps are you using and do you like them?
Morimoto Sealed 1.0 Bi-LED Headlight and yes O really like them. Multiple people in our club have used them successfully.
FFR #4402 MKII Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes, Purchase 8/22/2008 Sold 12/04/2018
FFR #8249 MK IV "Milano" Kit purchased 10/5/2018 - In-Process with 3.27 IRS, Multiport, Fuel Injected Supercharged 347 Big bore with Coil On Plug running Holley HP engine management, 576 RWHP, 510 Torque
https://thefactoryfiveforum.com/showthread.php?29980 Milano thread
TBull, I’m planning on getting the same set of LMR FR500s for my MK3. I am torn between going 275 up front vs 255. Since you bought the combo, I assume yours is 275? Would you buy them again? Can you please provide feedback on your experience and what you recommend? I’m worried that 275s would make the front end sluggish and would tram line on uneven roads. Yet getting the pre mounted set is very convenient vs buying wheels only and sourcing tires locally.
I love the tires. Yes I have the 275s on front and I haven't experienced anything Jerry with them so far. I have a set of Halibrands for the track that I always planned on doing 275 up front for those as well with the 315 in the rear. I installed FFMetal fat tire F panels in preparation for this. I have had very minor rubbing on the inner lip of the fender early on, but adjusted the car a little higher. I'm 4.25 or a little more in front to the bottom of the 4 inch tube and 4.75 in rear or there abouts. The fat tire panels really help rubbing on the inside too.
FFR #4402 MKII Supercharged 308 445 RWHP Sterling Grey W/ Black Sapphire Stripes, Purchase 8/22/2008 Sold 12/04/2018
FFR #8249 MK IV "Milano" Kit purchased 10/5/2018 - In-Process with 3.27 IRS, Multiport, Fuel Injected Supercharged 347 Big bore with Coil On Plug running Holley HP engine management, 576 RWHP, 510 Torque
https://thefactoryfiveforum.com/showthread.php?29980 Milano thread
Thanks for the feedback. How tall are the billboard letters that you used?
Also where on Etsy did you get the kit?