# 1115 resurrection

[Guy G]

Yeah, not sure how the polished firewall is going to hold up. the new tires are definitely gravel kickers. My 383 came with the build but I had it re-built at NYE's racing engines. 401hp 437tq. What's your Skip White HP numbers?

The 383 I’m looking at is advertised at 503 hp, 484 torque. I’ll know the actual when it arrives with the Dyno sheet. From speaking to Skip, at Skip White performance, it will be very street friendly. He’s used that combo often.

[Just 1 More]

Added some Hagan Fatties on FFR arms
20240317_194940.jpg20240317_194858.jpg20240317_192700.jpg20240317_192554.jpg

[JimLev]

I bought those same Hagan Fatties, nice mirrors.

[cvacca]

Schott Accelerators
Nitto 555 G2's
18x9 275/40-18
20x11 315/35-20
Attachment 196614Attachment 196615Attachment 196616

I'm interested in buying the McQueen bike fenders like you. Can't wait to see them on your car with those size tires and wheels that you have choosen.

[Just 1 More]

I'm interested in buying the McQueen bike fenders like you. Can't wait to see them on your car with those size tires and wheels that you have choosen.

Not going to be so easy, I need to do some serious modification to the fronts to get the coverage I need. Tires are bigger than the fenders

[cvacca]

275's in the front are wide, but look mean! How do you think the 315's in the rear will fit under the fenders, or do you think they will need to be modified also?

[Just 1 More]

275's in the front are wide, but look mean! How do you think the 315's in the rear will fit under the fenders, or do you think they will need to be modified also?

The 315's will barely fit, might stick out a little but that's ok with me.

[Just 1 More]

Close enough
20240406_122009.jpg20240405_195837.jpg

[Just 1 More]

Had a little self inflicted set back. I drilled a hole in my fuel tank. So, great excuse to get a Boyd's tank. Ordered one this morning. Pulled the tank out last night.

20240502_183158.jpg

20240502_183206.jpg

[Just 1 More]

Finished up the McQueen rear fenders last night. Didn't see how many fasteners to use so I did 7 using 1/4-20 rivnuts (deep reach for fiberglass) and stainless button heads on each one. Started 2" from each end and spaced 8.5" apart was the perfect layout.

20240514_211612.jpg
20240514_211559.jpg
20240514_211417.jpg
20240514_211355.jpg

[cvacca]

Good job! Will be nice to see when it's back on the ground how the spacing of those big 315's look with the edge of the fenders.

[Just 1 More]

While the tank is out, I took the opportunity to add a coating of the Boom Mat spray. This is my first time using this product and so far, I really like it. Nice thick coating that seems to do what it's intended to do. Did a little on the inner doors also.
20240520_103531.jpg20240520_103548.jpg

[TxMike64]

Those fenders look great!

[Just 1 More]

Installed the 3pt belts and removed the 4pt harness'. I think I got them installed correctly, didn't have any instructions.
20240522_202317.jpg
20240522_202338.jpg
20240522_202409.jpg

[Just 1 More]

For anyone wondering, Since the gauge was set up for a 33-240 sender, and Boyds doesn't offer one, The solution for the Boyds tank, sending unit and gauge was an Autometer fuel bridge, and a VDO sender. All is right with the world again
https://www.summitracing.com/parts/VDO-226-625
https://www.summitracing.com/parts/ATM-9109

20240602_194852.jpg

[Just 1 More]

I've been working on something different, Got it put together last night and fired right up. Didn't run it long, still have to do water lines, figure out how to run some stainless braid fuel lines and new plug wires. but.... IT RUNS!!!!

https://youtu.be/omqccc0eXOE?si=v_YEH-AEU3cTUtAR

[Just 1 More]

20240625_195925.jpg
20240625_195930.jpg
20240625_195930.jpg
20240625_200041.jpg

[FF33rod]

Now that is cool! even if it is a Chev...

Steve

[Just 1 More]

Now that is cool! even if it is a Chev...

Steve

LOL .. Thanks

[Ltfracing]

That is bad a#$

[Just 1 More]

Did some timing tuning today, Removed the vacuum advance and locked the mechanical advance, set timing at 32 degrees and shes snappy and happy.

https://youtu.be/XHno2DRU5M4

[Just 1 More]

Made a Manometer to fit the 4 barrel carbs so tomorrow I pay with the carbs and see if I can get them syncd
20240628_215058.jpg

[Just 1 More]

made fuel lines.. i'm kind of liking the old school red & blue vibe

20240629_163317.jpg

[Mastertech5]

Cross ram manifolds are the coolest looking but give up some horsepower to a tunnel ram. Very cool! Love it!

[Just 1 More]

Cross ram manifolds are the coolest looking but give up some horsepower to a tunnel ram. Very cool! Love it!

Yeah, Horsepower was definitely not a consideration... lol

[Just 1 More]

Pair of obsolete (and pretty rare) Arias Viper Scoops... because i like to be unique
20240709_192458.jpg20240709_192512.jpg20240709_192521.jpg

[progmgr1]

Man, those just scream '60's Hot Rod! Way Cool!

Keith HR #894

[Mastertech5]

Love it!

[Just 1 More]

WE GOT A VIN!!!!!!!!
Got my letter today from the BMV with an assigned VIN#.. now to continue with the process

[cvacca]

Congrats! That's a big step. Just wondering, how did you make out with the rear McQueen bike fenders and your wide_ss tires? Did you modify the fenders or just adjust the rear ride height to clear them?

[Just 1 More]

Congrats! That's a big step. Just wondering, how did you make out with the rear McQueen bike fenders and your wide_ss tires? Did you modify the fenders or just adjust the rear ride height to clear them?

So far i've just adjusted ride height so they don't rub. I thought it would look stupid but it doesn't, at least not to me. I really like the look of a full tire in the fenders rather than small tires tucked inside of the fenders.

[cvacca]

Great to hear. Any chance you can share a picture to see what those look like? I haven't ordered my wheels and tires yet, was kind of waiting to see how your 335's fit under the fenders first when the car is on the ground. I'm running an IRS, so my measurements might be a little different...

[Dmp0001]

Nice work!

[Just 1 More]

Great to hear. Any chance you can share a picture to see what those look like? I haven't ordered my wheels and tires yet, was kind of waiting to see how your 335's fit under the fenders first when the car is on the ground. I'm running an IRS, so my measurements might be a little different...

Here's what it looks like.. they're 315/35-20
20240824_192534.jpg

[Just 1 More]

Another milestone... Got the title in the mail over the weekend.. it's officially official.. It's Titled, insured and now tagged. The State of Indiana saw fit to title it as a...
YEAR: 1933
MAKE: Factory Five Racing
Model Name: Roadster
Body type: Coup
Odometer: Exempt

We are now street legal

[progmgr1]

Congratulations! Another major milestone.

Now get out there and drive the wheels off!

Keith HR #894

[Just 1 More]

And we're back to a single carb .. Unfortunately, I just couldn't get the crossram running good enough. SO to make life easier, back to one
20241018_161827.jpg20241018_161815.jpg

[Ltfracing]

Pm sent