driverside seat track options?

[luey2011]

good morning all,

looking for options on installing adjustable seat tracks on my gen 3 coupe. what are you all using?
I am installing the standard roadster black vinyl seats from FFR
thanks

[rhk118]

Hi Luey, I am using the Corbeau seat mounts with mine. The Corbeaus were too big for my seating position in the coupe BUT their mounts are good - have a nice solid frame and slide. You can install the black vinyl seats onto those - just mount some crossmember steel on them and bolt the seats down...I used a 1" bar in front and a 1/4" bar in back to give some slight angulation...hope that helps.

[luey2011]

Hi Luey, I am using the Corbeau seat mounts with mine. The Corbeaus were too big for my seating position in the coupe BUT their mounts are good - have a nice solid frame and slide. You can install the black vinyl seats onto those - just mount some crossmember steel on them and bolt the seats down...I used a 1" bar in front and a 1/4" bar in back to give some slight angulation...hope that helps.

thanks for the advise!

would you know the part number? or where to order them?

[rhk118]

Right from the Corbeau website - I got the lowest option...the next one up which I think is a 1.5 to 2" raise will put the Corbeau seats too high.