Star Mobile 1 Build

[TDSapp]

Your build is looking good... It looks like you are not too far off from having to post a first start video and then a Go Carting Video.



I put my horns right where you have yours mocked up.



I too have some paint to touch up from having to drill that hole once everything was done. I am also going to find a wire hanger that has a bolt hole big enough to go over the bolt for the horns. That way I am not drilling another hole anywhere.

[JOP33]

Your build is looking good... It looks like you are not too far off from having to post a first start video and then a Go Carting Video.



I put my horns right where you have yours mocked up.



I too have some paint to touch up from having to drill that hole once everything was done. I am also going to find a wire hanger that has a bolt hole big enough to go over the bolt for the horns. That way I am not drilling another hole anywhere.

Tim, you read my mind with the bolt for the horns. I did just that last night after drilling out the rivet. I’ll post pics this evening. I’m hoping for a first start by December.



I also might add for those of you that are installing a condenser and radiator shroud that you may want to make sure your front upper control arm bolts are installed with the heads toward the front of the vehicle. I had mine installed the opposite direction and had an interference issue with the radiator shroud. By flipping them I gained about 3/8” of clearance between the shroud when the control arms articulate.

Thanks