I haven't been posting much, but really happy with how my radiator brackets came out. It looked like I would have the same issue as others with the bottom radiator tube hitting the steering rack bellows, so I had to create some spacers to lift it up a bit. For the bottom, I kept it as simple as I could think, with a piece of rectangular cross section aluminum with a couple holes for to mount it and locate the radiator bushing. A few 1-1/4" diameter washers keep it centered in the FFR mount and a slightly larger washer covers the hole in the FFR mount, allowing it to be bolted on.

IMG_0261.JPGIMG_0277.JPG

I also had to trim off a plastic tab on the bottom of the radiator to prevent interference.
IMG_0279.JPGIMG_0280.JPG

Overall, I am satisfied with the solution. I raised the radiator by 1-1/4" though 1" might have been adequate.